Tektronix AM503B

Price : $ 595
  •  Equipment Location : USA
Description:
Tektronix AM503B Current Probe Amplifier

Condition: Refurbished

PRODUCT SPECS

(From Used-Line T&M Specifications )
Status Discontinued
See also AM5030

The Tektronix AM503B and AM5030 current probe amplifiers let you use one probe to simultaneously measure AC and DC current. The AM 503B is a single-width instrument that plugs into any Tektronix TM 500 or TM 5000 series power module. The amplifier converts the sensed current into a proportional voltage signal that you can measure directly with an oscilloscope.

The AM503B and AM5030 provide better linearity than other current measurement systems because of a current feedback process used with the probe. DC measurement capability and high bandwidth allow the Amplifier to accurately represent square waves and fast-rise signals.

The AM503B and AM5030 are used with the AM503 family of current probes (A6312, A6302, A6302XL, A6303, A6303XL, A604XL, CT4).

  • Simultaneous DC and AC current measurements
  • High sensitivity
  • One-button autobalancing and probe degaussing
  • No adjustments needed to match a current probe to an individual amplifier (except for the A6303 current probe)
  • Probe trim adjust allows fine tuning of gain for increased accuracy
  • DC Gain Accuracy: ≤1.5% after DC accuracy measurement and cal constant loading
  • DC Balance: ±2 mV
  • RMS Noise: <250 µA (2.5 mV) to <0.25 A, depending on installed probe
  • Bandwidth: ≥100 MHz; bandwidth limits differ depending on installed probe 
  • Rise time: ≤3.5 ns to ≤175 ns depending on installed probe
  • Signal delay: ~30 ns to ~105 ns, depending on installed probe 
  • Recommended calibration interval: One year

CONTACT THE SELLER (RFQ)


To:  Test Equipment Sales
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 1999



Test Equipment Sales


122
Visitors viewed Test Equipment Sales ads in the last 30 Days.


The dealer's latest update: over 30 days


8 Sparhawk Drive Londonderry 03053 NH USA  
More about this seller »


Sales Conditions:

At Test Equipment Sales, we accept several forms of payment for your purchase. Among them, MasterCard, Visa, Discover, electronic transfer, company and *personal checks,money orders and certified checks. Open accounts are available upon credit review. Personal checks require bank clearance before products may be shipped. 5 day right of refusal and a 90 day warranty on all pre-owned equipment. NIST traceable calibration available.

Some of the services we offer:

(Rentals) (Calibration) (Repair) (Manuals) (Market place)

Similar Listings: