Fluke - 5220A kHz and designed to

Price : $ 2640
  •  Equipment Location : Germany
Description:
Fluke - 5220A kHz and designed to calibrate alternating or direct current meters and shunts

Transconductance Amplifier 30 Hz - 5 kHz

Output Range: 0 to 20 A DC or RMS AC

The Fluke 5220A is a Transconductance Amplifier with a bandwidth from 30 Hz

to 5 kHz and designed to calibrate alternating or direct current meters and shunts and the current functions of digital multimeters that measure up to 20 A.

A known input voltage of 1 to 20 V produces a known output current of 1 to 20 A. It is ideal for applications where 20 A AC or DC current is required.

(For example calibration of the upper ranges of DMMs or used with a current coil to calibrate clamps and clamp meters.)

The 5220A can be programmed and controlled through a 5700A, 5720A, 5100B or 51001B.

Transconductance: 1 siemens (1 A per V)

Output range: 0 to 20 A DC or rms AC

Built-in protection

Overvoltage protection

Overcurrent protection

Overtemperature protection

Remote operation

Dimension (HxWxD): 7 x 17 x 22 in.

Weight: 50 lb

€ 2,200 $2,640 (US)

PRODUCT SPECS

(From Used-Line T&M Specifications )
Status Discontinued

The Fluke 5220A transconductance amplifier lets you calibrate alternating or direct current meters and shunts, and the current functions of digital multimeters that measure up to 20A.

The 5220A is designed to be controlled by a 5700A or 5100 Series B calibrator but can be driven by another voltage source such as the 5200A. When used with a 5100 Series B, the current range of those instruments is extened by a factor of 10 to 1.

Protection is designed in to eliminate problems caused by excessive inputs, open inputs, and overcompliance. Indicators on the front panel inform the user about any of these conditions. Automatic shutdown occurs if the internal temperature rises excessively.

Drive voltage to the 5220A can be introduced through the front panel of the rear panel. The connector on the rear allows the 5220A to become an extension to the current range of a 5700A or 5100 Series B calibrator. The two instruments operate as one integrated calibration system with all the advantages of single control point calibration.

A 5100 Series B calibrator requires a Y5000 interface/buffer to control a 5220A. A single Y5000 interface/buffer may also be used to control a 5205A power amplifier.

GPIB and RS-232 options are available.

  • Transconductance: 1 siemens (1 amp per volt)
  • Output range: 0 to 20 A dc or rms ac (28.3 A peak)
  • Maximum compliance voltage: ≥±4 V dc, or 3 V rms ac (4.25 V peak)
  • Maximum isolation voltage: ±20 V dc or 20 V ac rms
  • Transient recovery: Output will settle to within 0.01% of final value within 2 seconds following a programmed change in output current or frequency (10 ms for 5220A alone)
  • Load capability: Drives all resistive and capacitive loads consistent with current and compliance voltage capability. Drices inductive loads up to 200 µH, consistent with current and compliance voltage capability

CONTACT THE SELLER (RFQ)


To:  Instrumex GmbH
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 2001



Instrumex GmbH


1461
Visitors viewed Instrumex GmbH ads in the last 30 Days.


The dealer's latest update: 2 days ago


M├╝hlweg 2 Sauerlach D - 82054 N/A Germany  
More about this seller »


Sales Conditions:

Equipment is used, refurbished. Price quotes are valid for 30 days subject to prior sale. Customer assumes all freight charges (ex Sauerlach, Germany). Standard delivery is approx one week after receipt of payment. For international customers we expect wire payment in advance. Your sales representative will be able to advise you on any questions you have. Warranty is typically 6 months. Extended warranties are available on request. The customer is responsible for the cost of returning the unit to us. We pay for the return transport.

Some of the services we offer:

(Rentals) (Calibration) (Repair)

Similar Listings: