Fluke 5220A

Price : Call
Picture of Used-Line
  • Product Fluke                                              5220A is in stock
  •  Equipment Location : USA
Description:
Fluke 5220A Rent - CALL US:

PRODUCT SPECS

(From Used-Line T&M Specifications )
Status Discontinued

The Fluke 5220A transconductance amplifier lets you calibrate alternating or direct current meters and shunts, and the current functions of digital multimeters that measure up to 20A.

The 5220A is designed to be controlled by a 5700A or 5100 Series B calibrator but can be driven by another voltage source such as the 5200A. When used with a 5100 Series B, the current range of those instruments is extened by a factor of 10 to 1.

Protection is designed in to eliminate problems caused by excessive inputs, open inputs, and overcompliance. Indicators on the front panel inform the user about any of these conditions. Automatic shutdown occurs if the internal temperature rises excessively.

Drive voltage to the 5220A can be introduced through the front panel of the rear panel. The connector on the rear allows the 5220A to become an extension to the current range of a 5700A or 5100 Series B calibrator. The two instruments operate as one integrated calibration system with all the advantages of single control point calibration.

A 5100 Series B calibrator requires a Y5000 interface/buffer to control a 5220A. A single Y5000 interface/buffer may also be used to control a 5205A power amplifier.

GPIB and RS-232 options are available.

  • Transconductance: 1 siemens (1 amp per volt)
  • Output range: 0 to 20 A dc or rms ac (28.3 A peak)
  • Maximum compliance voltage: ≥±4 V dc, or 3 V rms ac (4.25 V peak)
  • Maximum isolation voltage: ±20 V dc or 20 V ac rms
  • Transient recovery: Output will settle to within 0.01% of final value within 2 seconds following a programmed change in output current or frequency (10 ms for 5220A alone)
  • Load capability: Drives all resistive and capacitive loads consistent with current and compliance voltage capability. Drices inductive loads up to 200 µH, consistent with current and compliance voltage capability

CONTACT THE SELLER (RFQ)


To:  Excalibur Engineering
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 2000



Excalibur Engineering


680
Visitors viewed Excalibur Engineering ads in the last 30 Days.


The dealer's latest update: 7 days ago


9201 Irvine Blvd. 92618 CA USA  
More about this seller »


Sales Conditions:

All refurbished equipment sold by Excalibur comes with our standard 10 day right of refusal and 12 month warranty, all standard accessories and manuals, unless otherwise specified (extended warrantied are also available). Distribution items are sold with full manufacturer's warranty as quoted. All previously used equipment is carefully tested in our accredited lab and expertly refurbished before it ships to ensure you receive the highest quality product you can count upon. For those with a limited budget, Excalibur also provides rental solutions for your business. Please contact our offices or your local Excalibur field rep to discuss your needs and how we can help.

Some of the services we offer:

(Rentals) (Calibration) (Repair)

Similar Listings: