Used Agilent HP E7405A for sale by Spaulding Surplus, LLC | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Analyzers Miscellaneous Analyzers Agilent HP E7405A

Agilent HP E7405A

Send Request
  • $17990

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent HP E7405A

Categories: Analyzers, Miscellaneous Analyzers

Manufacturer: Keysight Technologies (Agilent HP)

Model: E7405A

Condition: Used

Seller: Spaulding Surplus, LLC

Agilent E7405A 26.5 GHz EMC Spectrum Analyzer Opts 1DR 1DS AYQ A4H

This is an Agilent E7405A 9 kHz to 26.5 GHz EMC / Spectrum Analyzer with Options 1DR (Narrow Resolution Bandwidths to 10 Hz), 1DS (3 GHz Preamplifier), AYQ (EMI Detectors and FM Demodulation), A4H ( GPIB and Centronics Interface) and B72 (Memory Expansion). It has a fresh calibration good through November 2015! The Agilent E7405A EMC Analyzer provides the capabilities you need in an analyzer to make in-house EMI pre-compliance testing a reality. When combined with a broadband antenna, the E7405A has the capabilities to check for radiated emissions coming from your DUT. If you have an emissions problem, you can use the E7405A with an 11940A or 11941A close field probe to isolate and diagnose the source of the problem. This EMC analyzer has all the capabilities needed to perform EMI measurements including quasi-peak detector, average detector, EMI bandwidths, limit lines, and supports correction factors for antennas, cables, and amplifiers.

Features:

Automatic EMI measurements

Compatible with the E7415A EMI software

Built-in preamplifier analyzer, -166 dBm/Hz displayed average noise level

1 Hz resolution bandwidth

Built-in FM demodulation

1.0 dB overall amplitude accuracy (< 3 GHz)

± 0.5% span accuracy

 

 

Product specifications of Agilent HP E7405A (From Used-Line T&M Specifications)

  • Launch Date Jan-2049
  • Alternative N6141A EMC measurement application with N9030A, N9020A, or N9010A; W6141A EMC measurement application with N9000A.
  • Low end frequency limit 9 kHz
  • High End Frequency Limit 26.5 GHz
  • Resolution Bandwidth Min. 1 kHz
  • Resolution Bandwidth Max. 5 MHz
  • Amplitude Range DANL to maximum safe input level
  • Status Discontinued by Manufacturer

Early evaluation of the EMI performance of your design is essential for a successful product. The E7405A EMC standard analyzer provides the capabilities you need in an analyzer to make in-house EMI precompliance testing a reality.

The EMC standard analyzer offers you the best value with more productivity options built-in, and guarantees the fast delivery.

When combined with a broadband antenna, the E7405A provides the capabilities to check for radiated emissions coming from your DUT. This is best done in an area that is free from reflective objects such as an open area or EMI chamber.

Test for noise or interference placed on power or data lines by coupling the E7405A instrument to the power or data line through a line impedance stabilization network (LISN) device or absorbing clamp.

If you have an emissions problem, you can use the E7405A with an 11940A or 11941A close field probe to isolate and diagnose the source of the problem.

The E7405A can be purchased separately or as part of the 84115EM precompliance system. 

  • Log sweep
  • Built-in preamplifier
  • Optional tracking generator
  • Rugged, portable design

View Similar Listings
Hide Similar Listings

Listings similiar to Agilent HP E7405A

About Spaulding Surplus, LLC

Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later