| Bandwidth |
150 MHz |
| Channels |
4 |
Vertical Sensitivity Low Range [mV/div] |
2 |
Vertical Sensitivity High Range [V/div] |
5 |
| Status |
discontinued |
Launch Date
| -- |
| Discontinued on | Nov-2000 |
| Supported until | -- |
| See also | 2465A , 2467 |
Tektronix 2445A Specs (1.13 MB)
|
|
|
| Tektronix 2445A Features : |
- 150 MHz Bandwidth
- 2.33 ns Rise Time
- Auto Setup
- Save and Recall Setups
- Set-Up Sequencing
- On-Screen Trigger-Level Readout
- Volts and Time Cursors with On-Screen Readout
- Cursors After Delay
- Four Independent Channels
- Switchable 1 Mohm and 50 ohm Inputs (channels 1 & 2)
- Channel 1 and Channel 2 : Frequency Response (-3 dB Bandwidth): 150 MHz : Step Response: < 2.33 ns
- Horizontal System:
- A Sweep Time Base Range: 500 ms/div to 10 ns/div in a 1-2-5 sequence of 24 steps.
(X10 magnification extends fastest sweep rate to 1 ns/div)
- B Sweep Time Base Range: 50 ms/div to 10 ns/div in a 1-2-5 sequence of 21 steps.
(X10 magnification extends fastest sweep rate to 1 ns/div)
- DT Readout Resolution: either 20 ps or 0.025% of full scale, whichever is greater
- Sweep Delay Range: from 500 ms/div to 20 ns/div
|
|