| Seller Info :
|
| Company :
|
Global Test Supply
|
| Company Info :
|
Global Test Supply sells, rents, and leases electronic test and measurement equipment including oscilloscopes, spectrum analyzers, power supplies, multimeters, frequency counters, thermometers and megohmeters from leading manufacturers such as Agilent, Tektronix, Fluke, BK Precision, Instek, Promax, Rohde & Schwartz and Extech.
|
| Sales Conditions : | Global Test Supply conveniently accepts orders both online and offline. If you purchase online you can securely pay by American Express, VISA, MasterCard, PayPal or Google Checkout.
All new products are covered by the manufacturer's warranty. Most refurbished products are protected by the GTS Certified Warranty Program. These products include a standard 90 day warranty and some equipment is eligible for an extedned 1 year warranty. |
|
|
(ATE)
(Rentals)
|
| Address :
|
311 Judges Rd., Ste 12E
|
| Web :
|
View Website
|
| Phone :
|
+1-910-442-2164 |
| Fax :
|
+1-910-401-1114 |
|
|
| Order manual from Manuals Plus |
|
|
|
| |
|
Fluke 789 : Main Features and Specifications
|
| Type |
Handheld |
| Digits |
-- |
| Vdc Low Range |
0 |
| Vdc High Range |
1.0 kV |
| Basic Vdc Accuracy |
0.1% |
| Measurements |
DCV, ACV, Resistance, Continuity, Diode, DCA, ACA, Frequency, TRMS |
| Status |
new |
Launch Date
| -- |
| Discontinued on | -- |
| Supported until | -- |
 Fluke 789 Specs (133.8 KB)
|
|
|
| Fluke 789 Features : |
The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool.
Now it’s even better, the range is extended with the new Fluke 789 – the ultimate loop calibration multimeter.
The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing.
And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you.
Now process technicians can do a lot more while carrying a lot less.
- Precision 1000 V, 440 mA True-RMS digital Multimeter
- 0.1% dc voltage accuracy
- 0.05% dc current accuracy
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode Test and Continuity Beeper
- Simultaneous mA and % of scale readout
- 20 mA DC current source / loop calibrator / simulator
- Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
- Externally accessible battery for easy battery changes
- 24 V Loop power supply
- Very large dual display
- Enhanced backlight with 2 brightness settings
- 1200 Ohm drive capability on mA source
- HART mode setting with loop power and a built-in 250 ohm resistor
- 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
- Externally accessible fuses for easy replacement
- Infrared-port to process data in FlukeView Forms (V2.1) software
- Meets 1000 Volt EN61010-1 CAT III standards and 600 Volt EN61010-1 CAT IV standards
|
|
|
Quote Cart Help Contact Us
New EQ.