FLUKE 5500A

Price : $ 25990
  •  Equipment Location : USA
Description:
FLUKE 5500A Multi Product Calibrator w/ SC600, FRESH FLUKE CALIBRATION

This is a FLUKE 5500A Multi Product Calibrator with Option SC600 (600 MHz Oscilloscope Calibrator) and a fresh calibration performed by Fluke good through January 2016! The Fluke Z540 calibration alone costs almost $2000 and includes full incoming and outgoing test data. The 5500A sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current, and simulates power with phase control, resistance, capacitance, thermocouples and RTDs. The 5500A's Oscilloscope Calibration options provide level sine wave, fast edge, time mark and amplitude signals for calibration of oscilloscopes up to 600 MHz.The 5500A calibrates electrical measurement devices including:

Handheld and bench multimeters

Oscilloscopes and ScopeMeter® Test Tools

Wattmeters

Analog volt/ohm/amp/watt instruments

Basic Capabilities

DC voltage range: 0 - 1100V

DC current range: 0 - 11A

Resistance range: 0 - 330 MOhm

AC voltage range: 1.0mV - 1000V

AC current range: 0.033mA - 11A

Capacitance range: 0.33nf - 1.1mf

PRODUCT SPECS

(From Used-Line T&M Specifications )
  Fluke 5500A Specs (382.5 KB)
Status -
See also 5520A

The 5500A is a revolutionary product that addresses a wide cross-section of your electrical calibration work load. It sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current, and simulates power with phase control, resistance, capacitance, thermocouples, and RTDs. The Oscilloscope Calibration options of the 5500A provide level sine wave, fast edge, time mark, and amplitude signals for calibration of oscilloscopes up to 600 MHz.

The 5500A was designed to cover a very wide range of medium accuracy electrical measurement devices including:

  • Handheld and bench multimeters
  • Oscilloscopes and ScopeMeter® Test Tools
  • Wattmeters
  • Analog volt/ohm/amp/watt instruments
  • Electronic thermometers
  • Data loggers
  • Strip chart recorders
  • XY Recorders
  • Power harmonics analyzers
  • Process calibrators
  • Current clamps

Power is simulated using dual dc or ac outputs, allowing you to source two voltages or voltage plus current at the same time with precise phase control for wattmeter or power harmonics analyzer calibration. And the 5500A simulates a wide range of thermocouples and RTDs for temperature calibration.

For all its capabilities, the 5500A is remarkably affordable. For about the same price you would expect to pay for a calibrator for one type of instrument, the 5500A can provide you with far more, making cost justification easy. And when you consider how your workload might change in the future, the 5500A is an even better value. So instead of buying several standards, the 5500A meets your needs with a single, compact tool.

The 5500A also features the stability, linearity and low noise performance common to all Fluke calibrators. Each unit is shipped with test data and a certificate of traceability to nationally recognized standards.

Our optional Microsoft Windows®-based 5500/CAL simplifies the documentation of your procedures, adequacy and traceability as required by ISO 9000 and other similar quality standards. It also collects and reports calibration results information and helps consistently, quickly and efficiently calibrate a wide variety of instruments. 5500/CAL is a special version of our MET/CAL® Plus Calibration Software Package designed to work with the 5500A and a Fluke 45 DMM. Because it controls instruments via an RS 232 (serial port), no IEEE interfaces are required. That means that with a 5500A, a notebook computer and 5500/CAL, your whole calibration process can be automated, from creation of procedures to execution through results data collection and reporting. Thousands of procedures are included. They can be run as is, edited to fit your specific needs, or used as the basis to create new procedures.

With the 5500A, we took great care to make the calibrator as easy as possible to use. For almost everything you do with the 5500A, your hand moves naturally from left to right. Values are entered from the calculator-style keyboard. Values can be stepped up and down in even decades (1-2-5 sequence in scope mode) with the multiply and divide keys. Specifications for any value can be viewed with the push of a button.

The display of the 5500 is rugged, bright and easy to read from all angles. Output and information is clearly displayed so instrument status can be determined easily at a glance.

  • DC Voltage Range: 0 to ±1020V
  • DC Current Range: 0 to ±11A
  • Resistance Range: 0 to 329.999 MΩ
  • AC Voltage Range: 1 mV to 1020V
  • AC Current Range: 29 mA to 11A
  • Capacitance Range: 0.33 nF to 1.1 mF
  • DC Power Range: 109 mW to 11 kW
  • AC Power Range: 109 mW to 11 kW
  • Frequency Range: 0.01 Hz to 2.0 MHz

CONTACT THE SELLER (RFQ)


To:  Spaulding Surplus
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 2011



Spaulding Surplus


363
Visitors viewed Spaulding Surplus ads in the last 30 Days.


The dealer's latest update: 2 hours ago


12829 Landale Street Studio City, CA 91604 USA 91604  
More about this seller »


Sales Conditions:

All instruments are fully lab tested and guaranteed functional. Most come with an ANSI Z540 calibration and certificate, and those that do not can be calibrated for an additional fee. We offer a 5 day right of return and 30 day warranty on most units sold and accept payment by company check, cashiers check or wire transfer. Overseas or new customers prepay by wire transfer only.

Some of the services we offer:

(Rentals) (Calibration) (Repair) (Market place)

Similar Listings: