The Agilent 33502A is a dual-channel, high voltage output amplifier. It has an isolated analog front end with up to 50 Vpp (±25 V) output voltage range. It is also a very low-distortion amplifier with < 0.01% @ 10 kHz and 40 Vpp. The 33502A is designed to work as a companion for function generators to offer low-distortion, higher voltage outputs.

The 33502A has a fully isolated front end, which offers superior 5X voltage amplification to other amplifiers. You can independently configure input coupling (AC|DC) and input impedance (50O|1MO) to match your circuit. The input path can also be switched from amplified to direct (unamplified) without removing or connecting cables.

The 33502A, in a 2 unit, half-rack mechanical form factor, fits well both on your bench and in your test system. It also is configured with LAN (LXI Class-C compliant) and USB interfaces to meet your computer IO needs.

The 33502A provides both a programmable interface and a softkey-driven front panel for flexibility in configuring. The 33502A is compatible with existing Agilent function/arbitrary waveform generators including the 33120A, 33210A, 33220A, and 33250A. It can also be used to amplify signals from non-Agilent function and arbitrary waveform generators.

• Full-power BW: 100 kHz @ 50 Vpp
  
• Small-signal BW: > 300 kHz
  
• Slew Rate: 20 V/ms minimum
  
• THD+N: < 0.01% @ 10 kHz, 40 Vpp
  
• Output drive: 200 mA maximum
  
• Isolation: Floats ± 42 Vpk to earth

  Buy   (Isolated Amplifier)