Anritsu 68C

Price : Call
Picture of Used-Line
  •  Equipment Location : USA
Description:
68077C - Anritsu Signal Generators



The Anritsu 68C/69B series are your best choice for A.T.E. applications. They pack the highest performance available in a single 13.3 cm package to minimize rack space. High output power assures adequate signal strength to the device under test even after A.T.E. switching and cabling losses.

Accurately leveled output power to –120 dBm in 0.01 dB steps facilitates receiver sensitivity measurements. Fast 5 ms switching time maximizes system throughput. Internal list mode frees the A.T.E. controller to perform measurement analysis tasks. Optional SCPI programmability and free application drivers, including the IVICOM driver and National Instruments LabView® drivers, save you time and money in code generation and maintenance.

Anritsu Synthesized CW Generators provide accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.

  • Broad frequency coverage including 0.1 Hz to 65 GHz in a single coax output 
  • Ultra-low SSB phase noise and spurious 
  • +17 dBm guaranteed leveled power to 20 GHz 
  • 0.1 Hz optional frequency resolution 
  • <5 ms switching time for <100 MHz sweep steps 
  • Digital frequency sweep and digital power sweep 
  • Wide dynamic range with accurate output levels 
  • Intuitive, menu-driven front panel

Extra Specifications: Synthesized CW Generator

PRODUCT SPECS

(From Used-Line T&M Specifications )
  Anritsu 68077C Specs (35 KB)
Frequency Range Min.  10.0 MHz 
Frequency Range Max.  50.00 GHz 
Modulation  --  
Output Power  +12 dBm to -15 dBm (-20 dBm typical) ;with an attenuator -120 dBm  
Freq. Resolution  100.0 mHz 
Status Discontinued
Alternative MG3690A Series
See also 68017C, 68037C, 68047C, 68067C, 68087C, 68097C

The Anritsu 68C/69B series are your best choice for A.T.E. applications. They pack the highest performance available in a single 13.3 cm package to minimize rack space. High output power assures adequate signal strength to the device under test even after A.T.E. switching and cabling losses.

Accurately leveled output power to –120 dBm in 0.01 dB steps facilitates receiver sensitivity measurements. Fast 5 ms switching time maximizes system throughput. Internal list mode frees the A.T.E. controller to perform measurement analysis tasks. Optional SCPI programmability and free application drivers, including the IVICOM driver and National Instruments LabView® drivers, save you time and money in code generation and maintenance.

Anritsu Synthesized CW Generators provide accurate outputs over a wide frequency and power range for Local Oscillator duty and other CW applications.

  • Broad frequency coverage including 0.1 Hz to 65 GHz in a single coax output 
  • Ultra-low SSB phase noise and spurious 
  • +17 dBm guaranteed leveled power to 20 GHz 
  • 0.1 Hz optional frequency resolution 
  • <5 ms switching time for <100 MHz sweep steps 
  • Digital frequency sweep and digital power sweep 
  • Wide dynamic range with accurate output levels 
  • Intuitive, menu-driven front panel

CONTACT THE SELLER (RFQ)


To:  BRL Test, Inc.
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 2004



BRL Test, Inc.


934
Visitors viewed BRL Test, Inc. ads in the last 30 Days.


The dealer's latest update: 4 days ago


624 Douglas Ave. Suite 1406 Altamonte Springs 32714 FL USA  
More about this seller »


Sales Conditions:

Warranty provided, and right of refusal period.

Some of the services we offer:

(Rentals) (Calibration) (Repair)

Similar Listings: