ENA Series Network Analyzer 5 Hz - 3 GHz
Unit with options:
3L5 = LF-RF Network Analyzer with DC Bias Source 5 Hz - 3 GHz
005 = Impedance Analysis Function
The E5061B is an ENA series network analyzer.
It addresses a broad range of measurement needs of electronic components and circuits from low to high frequencies. It provides a new standard of frequency domain device analysis from 5 Hz to 3 GHz.
The E5061B offers basic S-parameter measurement and allows to measure the resonant frequency of a RFID tag without having to disassemble the RFID tag.
The E5061B-005 provides the impedance analysis (ZA) firmware for the E5061B-3L5 LF-RF network analyzer. This option enables the analyzer to measure impedance parameters of electronic components such as capacitors, inductors, and resonators.
The combination of NA and ZA capabilities further enhances the analyzer’s versatility as a general R&D tool. Basic ZA functionalities including fixture compensation and equivalent circuit analysis are supported by the firmware.
The DC biased impedance measurement is possible with the built-in DC bias source provided by the E5061B-3L5.
LF-RF Networkanalyzer (NA) Option:
5 Hz to 3 GHz
50 ohms S-paramenter test set
Gain phase test port (1 Mohms / 50 ohms inputs)
DC bias source
Impedance analysis function (option 005)
Display: Color-LCD TFT, 264 mm diagonal, resolution XGA (1024 x 768)
Interfaces: VGA-Video-Output, GPIB, USB (Typ A and Typ B), LAN, 24 bit I/O
Dimension (HxBxT): 235 mm x 432 mm x 296 mm
Weight: 14 kg
€ 26,500 $31,800 (US)