Teledyne-Lecroy MSO 104MXs-B

Price : Call
  •  Equipment Location : USA
Description:
Teledyne-Lecroy MSO 104MXs-B Opts: WSXs-EMB

Option: WSXs-EMB

PRODUCT SPECS

(From Used-Line T&M Specifications )
  LeCroy (Teledyne LeCroy) WaveSurfer 104MXs-A Specs (1.24 MB)
Bandwidth  1.0 GHz 
Channels  4  
Sample Rate  2.50 GSa/sec 
Memory Depth  Standard 10 Mpts/Ch (all channels)  
Status -
Launch Date Feb-2009
See also WaveSurfer 24MXs-A, WaveSurfer 44MXs-A, WaveSurfer 64MXs-A

The WaveSurfer Xs-A has a small form factor which packs a powerful processor that can handle long memory captures faster than any of the competition. The touch screen interface is the ultimate in ease-of use. With features like WaveStream fast viewing mode and WaveScan Search and Find, you can be confident that every problem can quickly be detected and analyzed.

Beyond these great features, the WaveSurfer offers a wide range of serial data trigger and decode tools for SPI, I2C UART, RS-232, LIN, or CAN as well as industry leading mixed signal capabilities to quickly troubleshoot embedded system designs. With bandwidths from 200 MHz to 1 GHz the WaveSurfer is the ideal oscilloscope for everyday design and debug.

The WaveSurfer was designed to shorten debug time through faster hardware and more sophisticated software. The hardware allows for fast processing of long memory even when using math and measurement functions. The software is designed to respond immediately to the user’s input even while processing data, eliminating any lag or delay.

Searching for data is very helpful, but wouldn’t it be better to Search for something you cannot trigger on? WaveScan allows searching in a single acquisition using more than 20 different modes. Or, set up a Scan condition and scan for an event over hours or days, and perform some action when it is found.

With 5 Mpts/Ch (10 Mpts/Ch with MXs-A) of fast acquisition memory standard the WaveSurfer provides long capture time at full sample rate, and longer times at lower sample rates. WaveSurfer long memory is also thoughtfully designed to respond quickly, even when measurements, math, or serial decoders are being used.

WaveStream provides a vibrant, intensity graded (256 levels) display with a fast update to closely simulate the look and feel of an analog oscilloscope. Turn WaveStream ON or OFF, and adjust intensity, using the front panel knob. Use it only when you want to.

Keep your testing efficient with a thoughtfully designed user interface that provides the busy engineer with a GUI that is smooth, transparent, and easy to use. Use the touch screen to quickly access all triggers, math functions and measurement parameters or to “draw a box” around the area of interest and zoom all channels to the desired area.

Save time when working with embedded controllers by adding high-performance mixed signal capability to the WaveSurfer. Capture digital signals up to 500 MHz with up to 50 Mpts/Ch memory, 2 GS/s and 18 or 36 channels. Quickly and easily isolate specific serial data events with optional I2C, SPI, UART, CAN and LIN trigger and decode capabilities.

The ZS Series of high impedance active probes provide full bandwidth at the probe tip, and the high impedance (1 MO || 0.9 pF) you want. A variety of standard and available probe tip and grounding accessories are offered to meet any requirement. What’s more, ZS Series probes are available for a very affordable price. Use the ZS1000 with 200 to 600 MHz WaveSurfers and the ZS1500 with 1 GHz WaveSurfers to give full system bandwidth at the probe tip.

  • 200 MHz to 1 GHz bandwidths
  • Sample Rates up to 5 GS/s
  • 10 Mpts/Ch Memory
  • LabNotebook™ Documentation and Report Generation
  • Advanced Math with 15 Different Functions and Enhanced FFT
  • Powerful SMART Trigger™ Capabilities
  • Responsive User Interface
  • WaveStream™ Fast Viewing Mode
  • WaveScan™ – Advanced Search and Find
  • Bright 10.4" Touch Screen Display
  • Only 15 cm (6") Deep - The most space-efficient oscilloscope for your bench from 200 MHz to 1 GHz
  • Local Language User Interface - Select from 10 language preferences. Add a front panel overlay with your local language
  • LXI Compliant

Note: The 104MXs was originally released in October 2007. LeCroy released the 104MXs-A in February 2009.

CONTACT THE SELLER (RFQ)


To:  Liberty Test Equipment, Inc.
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 2006



Liberty Test Equipment, Inc.


815
Visitors viewed Liberty Test Equipment, Inc. ads in the last 30 Days.


The dealer's latest update: over 30 days


1640 Lead Hill Blvd. Suite 120 Roseville 95661 CA USA  
More about this seller »


Sales Conditions:

END USERS ONLY! 10-day right of return, 12-month warranty, around-the-clock NIST traceable/ISO registered lab & all standard accessories. Pricing and availability are subject to change. Many payment options, terms, credit card, checks, lease terms, rental, etc.

Some of the services we offer:

(Rentals) (Calibration) (Repair) (Manuals) (Market place)

Similar Listings: