Used Fluke 225C for sale by MATsolutions | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Oscilloscopes Handheld Oscilloscopes Fluke 225C

Fluke 225C

Send Request
  • Ask for price

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Fluke 225C

Categories: Oscilloscopes, Handheld Oscilloscopes

Manufacturer: Fluke

Model: 225C

Condition: Used

Fluke 225C Digital Scopemeter

Product specifications of Fluke 225C (From Used-Line T&M Specifications)

  • Launch Date Oct-2008
  • Display Count 5 k
  • Measurements DCV,ACV,Resistance,Continuity,Diode,DCA,ACA,Frequency,TRMS,Temperature,Duty Cycle,Pulse Width,dBm
  • Bandwidth 200 MHz
  • Sample Rate 2.5 GSa/sec
  • Display 144 mm full-color LCD, with backlight, 320 x 240 pixels, 12 divisions of visible screen width
  • See also 215C
  • Status --

Based on the 199C and 196C Color ScopeMeters, the 225C and 215C offer the full functionality of those instruments yet with the addition of powerful test capabilities for a wide variety of Industrial Bus systems. When in Bus health Test mode, these ScopeMeters automatically make an analysis of the electrical signals passing through the bus, and compare the parameters to standard values as described in the industry standards for that bus type. Alternatively, the user may select an ‘Eyepattern’ display to visually check the overall signal quality.

Parameters are automatically qualified as ‘good’, ‘weak’ or ‘bad’ based on a comparison to the appropriate industrial standards or to user set reference values. Each of the measured parameters is presented with momentary value and with statistical minimum and maximum values measured over time. The reference values used are also displayed, to give the user an easier grip on the systems behaviour. Tested parameters include signal amplitudes, bias voltage, rise- and fall-times, jitter, distortion and noise levels (in-band noise as well as out-of-band noise) depending on the requirements of the associated industry standard.

  • Bus Health Test capability for industrial buses - Measurement, where applicable, of bias voltage level, signal amplitude, pulse width or baud rate, risetime, fall time, jitter, signal distortion, noise HF, noise LF, in-band noise
  • High waveform resolution of 3000 datapoints per channel
  • Frequency Spectrum using FFT analysis
  • Connect-and-View™ automatic triggering, a full range of manual trigger modes plus external triggering
  • Digital Persistence for analyzing complex, dynamic signals like on an analog oscilloscope
  • Fast display update rate for seeing dynamic behavior instantaneously
  • Automatic capture and replay of 100 screens
  • Cursor measurements
  • 27,500 points and more per input record length using ScopeRecord™ mode
  • 1,000 V CAT II and 600 V CAT III safety certified
  • Up to 1,000 V independently floating isolated inputs
  • 5000 count DMM and paperless recorder built-in
  • Auto/manual ranging, relative measurements (zero reference)
  • Four hours rechargeable NiMH battery pack

View Similar Listings
Hide Similar Listings

Listings similiar to Fluke 225C

About MATsolutions

Logo of MATsolutions
Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later