Tektronix MSO70404C

Price : $ 25750
Used Tektronix MSO70404C by MATsolutions
Used Tektronix MSO70404C by MATsolutions
  • Product Tektronix MSO70404C is in stock
  •  Equipment Location : USA
Description:
Tektronix (Tek) MSO70404C Digital & Mixed Signal Oscilloscope, 4 GHz, 4 CH

PRODUCT SPECS

(From Used-Line T&M Specifications )
Type  Benchtop  
Bandwidth  4.0 GHz 
Scope Channels  4  
Digital Channels  16  
Sample Rate  25.0 GSa/sec 
Memory Depth  10 M on all 4 channels standard, up to 125 M on all four channels with option.  
Status -
Launch Date Apr-2011
See also MSO71254C, MSO71604C, MSO72004C, MSO70604C, MSO70804C

The DPO/DSA/MSO70000 Series is the most accurate real-time performance oscilloscope on the market. Discover critical signal information with a 4 channel system bandwidth of 20 GHz combined with the highest waveform capture capability for low noise, high margin visibility. Capture accurately using the only available hardware-based serial pattern trigger for data rates up to 6.25 Gb/s. Increase system visibility using the MSO70000 models which include 16 logic channels with a very accurate 80psec timing resolution. The MSO70000C combines the signal visibility and timing features of a high performance logic analyzer with the analog precision, probing and usability of a high performance real-time oscilloscope. This makes it the ideal debug and verification tool for such demanding high-speed design applications as DDR memory, high performance ASICs, FPGAs, system-on-a-chip devices, and digital RF.

  • On All Four Channels Simultaneously
    • 20, 16, 12.5, 8, 6, and 4 GHz Bandwidth Models
    • Up to 50 GS/s on Real-time Sample Rate
    • Up to 250 Megasample Record Length with MultiView Zoom™ Feature for Quick Navigation
    • Fastest Waveform Capture Rate with >300,000 wfms/s Maximum per Channel
  • Uncompromised Bandwidth – Up to 20 GHz on all 4 channels enables measurement on the latest high-speed serial standards
  • Superior Signal Integrity and Excellent Signal-to-Noise Ratio – Observe the truest representation of your waveform
  • Industry-leading Sample Rate and Timing Resolution: 100 GS/s on 2 Channels (20, 16, and 12.5 GHz models)
  • 16 Logic Channels with 80 ps Timing Resolution for Debug of Digital and Analog Signals (MSO70000 Series only)
  • iCapture (MSO70000 Series only): When an anomaly is seen on digital lines, iCapture delivers new insight into the analog behavior of the digital signals. With iCapture, you can route any 4 of the 16 logic channels to the MSO70000 Series analog acquisition system so that these signals can be viewed in finer detail. The unique iCapture multiplexer circuitry provides simultaneous digital and analog views of signals without having to move the logic probe or double probe the circuit
  • Embedded Serial Bus (I2C, SPI) Decoding and Triggering (MSO70000 Series only): Lets you monitor or debug subsystems and components, such as frequency synthesizers, D/A converters, and Flash Memory that are controlled or monitored using I2C or SPI serial buses
  • Pinpoint® Triggering – Minimize time spent trying to acquire problem signals for efficient troubleshooting and shortened debug time
  • 6.25 Gb/s Real-time Serial Trigger – Assures triggering on the first instance of a specified NRZ or 8b/10b pattern to allow isolation of pattern-dependent effects
  • Search & Mark – Provides waveform pattern matching and software triggers for signals of interest
  • P7500 TriMode™ Probing System – Perfectly matched signal connectivity from 4 GHz to 20 GHz
  • Application Support for High-speed Serial Industry Standards, RF, Power Supplies, and Memory – Enables standard-specific certification, measurement automation, and ease of use

MSO70404C specifications:

  • Vertical system
    • Bandwidth (User-selectable DSP enhance): 4 GHz
    • Hardware Analog Bandwidth (–3 dB): 4 GHz
    • Input channels: 4
    • Logic channels: 16 
    • Rise time 10% to 90% (typical): 98 ps
    • Max Input Voltage, 50 Ω: <5.0 VRMS for ≥100 mV/div; also determined by TekConnect accessory 1.0 VRMS for <100 mV/div
    • Vertical Resolution: 8 bit (11 bit with averaging)
  • Vertical system logic channels
    • Input channels: 16
    • Analog bandwidth: 2.5 GHz with P6780 logic probe, 350 MHz with P6717 logic probe
    • Vertical resolution: 1 bit
    • Logic threshold range: -2 to +4.5 V with P6780 logic probe, -1.5 to +4.0 V with P6717 logic probe
    • Maximum input voltage: ±15 V nondestruct
  • Horizontal time base system
    • Time base range: 20 ps/div to 1000 s/div
    • Time resolution (in ET/IT mode): 200 fs
    • Channel-to-channel deskew: Range ±75 ns
    • Jitter noise floor (typical) (With BW bandwidth enhance enabled): 340 fs
    • Time Base Delay Time Range: –5.0 ks to 1.0 ks
  • Acquisition system
    • Sample rate, real-time Mode 1, 2, 3, or 4 channel (max): 25 GS/s
    • Sample rate, ET/IT Mode (Max): 5 TS/s
    • Maximum record length per channel with standard configuration: 10 M on all four channels, options for increased record length available
    • Maximum duration at highest real-time resolution with standard memory: 0.4 ms
  • Acquistion system logic channels
    • Sample rate - all channels (max): 12.5 GS/s
    • Timing resolution: 80 ps
    • Maximum record length per channel: 125 M on all channels (with option)
    • Minimum detectable pulse width: <400 ps
    • Maximum number of buses: 16 
    • Number of channels per bus: Up to 24 (16 logic, 4 analog, 4 math)
  • Acquisition modes
    • Averaging: From 2 to 10,000 waveforms included in average
    • Envelope: From 1 to 2×109 waveforms included in min-max envelope
    • FastAcq: FastAcq optimizes the instrument for analysis of dynamic signals and capture of infrequent events
    • Maximum FastAcq Waveform Capture Rate: >300,000 wfms/s on all 4 channels simultaneously
    • FastFrame™: Acquisition memory divided into segments; maximum trigger rate >310,000 waveforms per second. Time of arrival recorded with each event. Frame finder tool helps to visually identify transients
    • Hi-Res: Real-time boxcar averaging reduces random noise and increases resolution
    • Peak Detect: Captures and displays narrow glitches at all real-time sampling rates: 1 ns at ≤125 MS/s; 1/sample rate at ≥250 MS/s
    • Roll Mode: Scrolls sequential waveform points across the display in a right-to-left rolling motion. Works at sample rates up to 10 MS/s with a maximum record length of 40 MS
    • Sample: Acquires and displays sampled values
    • Waveform Database: Accumulates waveform database providing three-dimensional array of amplitude, time, and counts
  • Trigger characteristics
    • A Event and Delayed B Event Trigger Types: Edge, Glitch, Runt, Width, Transition Time, Timeout, Pattern, State, Setup/Hold, Window – all except Edge, Pattern, and State can be Logic State qualified by up to two channels
    • Main Trigger Modes: Auto, Normal, and Single
    • Trigger Sequences: Main, Delayed by Time, Delayed by Events, Reset by Time, Reset by State, Reset by Transition. All sequences can include separate horizontal delay after the trigger event to position the acquisition window in time
  • Logic Pattern Trigger (MSO70000 Series)
    • Threshold range: P6780 is -2 to +4.5 V, P6717 is -1.5 to +4 V
    • Bus trigger maximum toggle rate (I2C, SPI, RS-232/422/485/UART): 10 Mb/s
    • USB: Low-speed, full-speed
    • Enhanced Triggering: User-selectable; enhanced triggering corrects the difference in timing between the trigger path and the acquired data path (supports all Pinpoint trigger types on both A- and B-Events except pattern trigger); Not available in FastAcq mode
    • Line: Trigger on power line signal. Level fixed at 0 V

CONTACT THE SELLER (RFQ)


To:  MATsolutions
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 2002



MATsolutions


396
Visitors viewed MATsolutions ads in the last 30 Days.


The dealer's latest update: 2 days ago


1600 Corporate Court, Suite 150 Irving 75038 TX USA  
More about this seller »


Sales Conditions:

MATsolutions offers a ten day ROR, standard ninety day warranty on all items sold. With established credit terms, MATrewards program offers six months warranty on most orders at no additional cost and 1st year return to MATsolutions re-calibration! All items are calibrated traceable to NIST by our accredited lab, Terms of Net-30 available with approved credit on corporate accounts. Visa, MC and AMEX accepted.

Some of the services we offer:

(Rentals) (Calibration) (Repair)