Used Tektronix for sale by World Equipment Source | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Plug-ins Amplifier Plug-ins TEKTRONIX 602

TEKTRONIX 602

Send Request
  • Ask for price

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of TEKTRONIX 602

Categories: Plug-ins, Amplifier Plug-ins

Manufacturer: Tektronix

Model: 11A34

Condition: Used

TEKTRONIX 602 Digitizing Signal Analyzer Mainframe W/11A34_ ID 33333

Condition: Used
Dimensions: 26”(L)x17”(W)x12.75”(H)
TEKTRONIX 602 Digital Signal Analyzer Mainframe W/11A34
The DSA602 Digitizing Signal Analyzer contains powerful internal digital signal processors that can process digitized signals up to 180 times per second. Features include: 2 G Samples/s Sampling Rate 8-Bit Vertical Resolution 1 GHz System Bandwidth 12 channels of acquisition display of 8 waveforms Up to 4 channels of concurrent single-shot capability Time, Event, Level, and Boolean Qualified Triggering
System Bandwidth: 1 GHz (with modules installed)
• Sampling Rate: 2G samples/s
• Verticle Resolution: 8-bit
• Channels of Acquisition: 12 Display of waveforms: 8
• Record Length: 32k
• Up to 4 channels of concurrent single-shot capability
• Time, event, level, and Boolean qualified triggering
• Over 24 waveform functions and 24 automatic measurements
• Centronics, RS-232, and GPIB interface

Asset# 33333/BA

Product specifications of TEKTRONIX 602 (From Used-Line T&M Specifications)

  • Launch Date Jan-2049
  • Frequency Range - High 300 MHz
  • Status Discontinued by Manufacturer

The Tektronix 11A34 is a four channel vertical amplifier for the 11000 Series mainframes.

Two built-in four-pole bandwidth limit filters (100 MHz and 20 MHz) may be activated to reduce unwanted high frequency noise at 24 dB/octave for each channel.

Both coarse and fine deflection factors steps are calibrated. At 1 mV/div, the high resolution calibrated dc offset has a setability of 25 µV and a range of ±1 V (equivalent to 16 bits), giving an effective screen height of 2000 div, and permitting absolute dc measurement accuracies to ±0.4%.

  • Four channels
  • 1 mV/Div to 10 V/Div calibrated deflection factors in 1% increments
  • Input impedance is switchable 50 Ω ±0.5% or 1 MΩ in parallel with 15 pF
  • High resolution calibrated Dc offset
    • 1 mV/div to 99.5 mV/div: ±1 V, resolution 25 µV
    • 100 mV/div to 0.995 V/div: ±10 V, resolution 250 µV
    • 1 V/div to 10 V/div: ±100 V, resolution 2.5 mV
  • Fast overdrive recovery
    • 1 mV/div to 99.5 mV/div: To within ±(0.3% + 0.1 div) within 50 ns from ±2 V step
    • 100 mV/div to 995 V/div: To within ±1% within 50 ns from ±20 V step
    • 1 V/div to 10 V/div: To within ±1% within 50 ns from ±200 V step
  • Typical noise (RMS)
    • 1 mV/div to 1.99 mV/div: 0.12 div
    • 2 mV/div to 4.98 mV/div: 0.06 div
    • 4 mV/div to 9.95 mV/div: 0.025 div
    • 10 mV/div to 10 V/div: 0.014 div
  • Input coupling modes: Ac, dc, and off
  • Ac coupling low frequency - 3 dB point: 10 Hz or less (1 MΩ input impedance)
  • Maximum input voltage
    • 1 MΩ: 500 V (dc + peak ac)
    • 50 Ω: Input automatically disconnects when the input signal exceeds safe limits

View Similar Listings
Hide Similar Listings

Listings similiar to TEKTRONIX 602

About World Equipment Source

Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later