Agilent HP 6264B

Price : $ 195
  • Product Agilent HP 6264B is in stock
  •  Equipment Location : USA
Description:
HP/AGILENT 6264B POWER SUPPLY, 0-20 V/0-20 A, DC

PRODUCT SPECS

(From Used-Line T&M Specifications )
Number of
Outputs 
--  
Max. Voltage 
Max. Current 
Ripple and Noise  --  
Computer Interface  --  
Status Discontinued
Alternative N5744A DC System Power Supply, 20V, 38A, 760W
See also 6274B, 6256B, 6263B, 6265B, 6266B, 6267B, 6271B

The eight models of the 6200 Series constant-voltage / constant-current DC power supplies use a transistor series regulator combined with a triac preregulator for high efficiency, excellent regulation, and low ripple and noise. These supplies are suitably packaged for either bench or relay rack operation. Models 6256B, 6264B, 6267B, and 6274B are housed in a 5 1/4-inch high full-rack-width cabinet, and  models 6263B, 6265B, 6266B, and 6271B are housed in a similar 3 1/2-inch high cabinet.

The outputs of these supplies can be varied from zero to full rated voltage or current by setting coarse and fine voltage and current controls on the front panel, or they can be programmed remotely by resistance or voltage inputs to rear panel terminals. When the voltage controls are used to establish a constant output voltage, the current controls establish a current limit that can protect the load from overcurrent; when the current controls are used to establish a constant output current, the voltage controls establish a voltage limit that can protect the load from excessive voltage. The crossover from constant-voltage to constant-current operation, or vice versa, occurs automatically when the load current reaches the value established by the current controls or the voltage reaches the value established by the voltage controls. The output voltage and current can both be monitored continuously on front panel meters.

  • 6264B output: 0-20 volts at 0-20 amps
  • 6264B resolution: 2 mV, 20 mA 
  • PARD (ripple and noise):
    • Constant voltage: <200 microVrms
    • Constant current: <5 mArms 
  • Built-in overvoltage protection crowbar circuit
  • Convection cooled
  • Remote programming of outputs
  • Remote sensing
  • Auto-parallel operation for sharing loads between two or three similar supplies
  • Auto-series operation for controlling the outputs of two or three supplies simultaneously
  • Auto-tracking operation for master-slave control where two or three supplies share a common negative output

CONTACT THE SELLER (RFQ)


To:  Naptech Test Equipment, Inc.
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 1999



Naptech Test Equipment, Inc.


1484
Visitors viewed Naptech Test Equipment, Inc. ads in the last 30 Days.


The dealer's latest update: over 30 days


11270 Clayton Creek Rd. Lower Lake 95457 CA USA  
More about this seller »


Sales Conditions:

Prices listed on Used-Line are for 3 month warranty with 10 day right to return. If you prefer 12 MONTH WARRANTY visit our website prices. We offer 12 MONTH WARRANTY because we are confident our products will work for years to come. We are well known for our quality products, reconditioned to like new in many cases with standard accessories, manuals and NIST calibration. Naptech will also sell items with a 6 month warranty period or a 10 day ROR at lower prices if you prefer. Just ask us! Shipping via Fed Ex Air Service in most cases, or however you prefer.

Some of the services we offer:

(Rentals) (Calibration) (Repair) (Manuals)

Similar Listings: