SORENSEN DCR20-50B

Price : $ 425
  • Product SORENSEN DCR20-50B is in stock
  •  Equipment Location : USA
Description:
SORENSEN DCR20-50B POWER SUPPLY, 0-20 V/0-50 A

PRODUCT SPECS

(From Used-Line T&M Specifications )
Number of
Outputs 
--  
Max. Voltage  20.0 V 
Max. Current  1.00 kA 
Ripple and Noise  65 mVrms  
Computer Interface  --  
Status Discontinued
See also DCR40, DCR150, DCR300, DCR60

The DCRA series are designed for either rack or floor mounting, and provide stable, highly regulated dc outputs from a wide range of three phase input voltages and frequencies. The models in the series all exhibit excellent transient response and low ripple in both voltage and regulating and current limiting modes. Other design features include provisions for remote programming, remote sensing, series and parallel operation, automatic crossover, and other failure protection systems. Increased versatility is also provided by use of a floating neutral, which permits use of either three or four wire input.

The typical DCR-B (designed for either bench or rack use) power supply provides highly regulated, precise dc output, adjustable over a wide range. It operates from a nominal 115 Vac (208/220/230 Vac inputs are available as options) and exhibits a rapid response to transients, both load and line. DCR-B series supplies are phase controlled type with SCRs (Silicon Controlled Rectifiers) or Triacs at the input to the transformer, followed by a passive LC filter. This design allows for a wide range of output voltages, simplicity of design, and offers large amounts of regulated power at relatively high efficiencies compared to linear regulators. All controls used during normal operation, except the OVP control, are mounted on the front panel. These include a power circuit breaker, FINE and COARSE VOLTAGE adjust potentiometers, and FINE and COARSE CURRENT adjust potentiometers. The system output is taken across a terminal pair at rear terminal strip TB2 or from the binding posts on the front panel of the supply. There are two basic operating modes, voltage and current. In the voltage mode, the voltage is held constant while the current varies with the load. In the current mode, the voltage varies, and current is held constant. The automatic crossover feature enables the unit to switch operating modes as a function of load requirements. Other design features include provisions for remote programming, remote sensing, series and parallel operation, and protection features, including a unit shutdown circuit.

CONTACT THE SELLER (RFQ)


To:  Naptech Test Equipment, Inc.
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 1999



Naptech Test Equipment, Inc.


1484
Visitors viewed Naptech Test Equipment, Inc. ads in the last 30 Days.


The dealer's latest update: over 30 days


11270 Clayton Creek Rd. Lower Lake 95457 CA USA  
More about this seller »


Sales Conditions:

Prices listed on Used-Line are for 3 month warranty with 10 day right to return. If you prefer 12 MONTH WARRANTY visit our website prices. We offer 12 MONTH WARRANTY because we are confident our products will work for years to come. We are well known for our quality products, reconditioned to like new in many cases with standard accessories, manuals and NIST calibration. Naptech will also sell items with a 6 month warranty period or a 10 day ROR at lower prices if you prefer. Just ask us! Shipping via Fed Ex Air Service in most cases, or however you prefer.

Some of the services we offer:

(Rentals) (Calibration) (Repair) (Manuals)

Similar Listings: