Used Agilent HP 11722A for sale by Test Equipment Depot | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Sensors Power Sensors Agilent HP 11722A

Agilent HP 11722A

Send Request
  • $1495

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent HP 11722A

Categories: Sensors, Power Sensors

Manufacturer: Keysight Technologies (Agilent HP)

Model: 11722A

Condition: Used

Keysight / Agilent (HP) 11722A Power Sensor, 100 kHz to 2.6 GHz, 10 microW to 1 W, -20...

Keysight / Agilent (HP) 11722A Power Sensor, 100 kHz to 2.6 GHz, 10 microW to 1 W, -20 to +30 dBm, Refurbished. The Keysight Agilent HP 11722A contains a silicon monolithic thermocouple as a power-sensing element. With the Keysight Agilent HP 11722A you get all the performance of the Keysight Agilent HP 8901B or Keysight Agilent HP 8902A, plus superb power-measurement accuracy, at a single connector. You can characterize a signal without switching back and forth between the power sensor and the analyzer's RF input. The Keysight Agilent HP 11722A is one of our refurbished Sensor Modules that was designed for use with the Keysight Agilent HP 8901B Modulation Analyzer and the Keysight Agilent HP 8902A Measuring Receiver.
Condition: Refurbished

Product specifications of Agilent HP 11722A (From Used-Line T&M Specifications)

  • Launch Date Jan-2049
  • Status Discontinued by Manufacturer

The HP 11722A sensor module is essentially an RF power sensor with an RF switch at its input. The RF input to the sensor module can be remotely switched between its power sensor and a through path RF cable. The power sensor is used to measure the average power from an external RF source.

In use, the sensor module is connected to an RF source. The two output cables of the sensor module are connected to a compatible power measuring instrument such as the 8901B modulation analyzer or the 8902A measuring receiver. The power meter input is a 50 Ω load to the RF source. The power measuring instrument indicates the power dissipated in this load.

Special care is taken with each sensor module to minimize input SWR and resulting errors. A low SWR attenuator isolates the power sensor from the source under test, reducing mismatch.

The calibration factors of the 11722A are conveniently printed on the sensor module for easy reference.

  • Power range: -20 to +30 dBm (10 µW to 1 W)
  • Frequency range: 100 kHz to 2.6 GHz
  • Linearity: -4% to +2%
  • Input SWR: <1.15 when connected to an 8901B or 8902A
  • RF input maximum average power: 1 W
  • Maximum peak power: 100 Wpeak or 300 W ms per pulse
  • Switch life: >1,000,000 switchings
  • Switch isolation: >90 dB
  • Input connector: Type-N, male
  • Input impedance: 50 Ω nominal

View Similar Listings
Hide Similar Listings

About Test Equipment Depot

Logo of Test Equipment Depot
Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later