USB Power Sensor/Meter 10 MHz to 8 GHz,
Average/Peak/Pulse, Input Connector N-male
Unit sold with a valid Tektronix calibration certificate
The PSM3000, PSM4000, and PSM5000 Series are compact power sensors/meters that deliver fast, accurate RF and microwave power measurements. A broad range of CW and pulse modulation measurements are available, depending on the series you choose. Each meter comes with Windows Power Meter application software for controlling the meter, displaying readings, and recording data. The combination of the sensor/meter and PC provides a complete solution, eliminating the need for a separate, dedicated meter mainframe.
Key performance specifications:
8 GHz, 18 GHz, 20 GHz, and 26.5 GHz models
Models Available with N and 3.5 mm connectors
Dynamic range as low as –60 dBm and as high as +20 dBm
Uncertainty as low as 2.6%
Reading rates up to 2000 readings/s
PSM4120:
Average/Peak/Pulse
Input connector: N-male
Frequency range: 10 MHz to 8 GHz
Dynamic range:
10 MHz to 6 GHz: –60 dBm to +20 dBm
6 GHz to 8 GHz: –50 dBm to +20 dBm
Max. peak-to-average ratio:
10 MHz to 6 GHz: 80 dB
6 GHz to 8 GHz: 70 dB
Internal Video bandwidth: 10 Hz (typ.)
Timebase: +/-50 ppm (typ.)
Sample rate: 500 kS/s
Average power, min.pulse width: 500 ns (typ.)
Peak power, min. pulse width: 200 ns (typ.)
Features:
Meters are calibrated over full temperature range – no zero or cal needed before making measurements, saving time and avoiding poor-quality data
Average power, duty cycle corrected pulse power, and measurement logging on all models
Included applications run under Microsoft Windows:
Power meter application
High-speed logging application
LabVIEW drivers and programming examples for most common Windows programming environments are available for automated system support
Max hold and relative measurement modes
Offset, frequency response, and 75 ohms min. loss pad correction
Flexible averaging modes for quick, stable measurements
TTL trigger input and output allow synchronization with external instruments
Pass/Fail limit mode
Compact size
The PSM4000 and PSM5000 series offer:
Pulse power, duty cycle, peak power, and crest factor measurements
Measure peak, average and minimum power on bursts with adjustable offset and duration
€ 2,320 $2,784 (US)