Agilent HP E7402A

Price : Call
  •  Equipment Location : USA
Agilent HP  The Keysight E7402A is a 9KHz-3GHz EMC Spectrum AnalyzerEarly evaluation of your design's EMI performance is essential for a successful product. The Keysight E7402A provides you with all the features that make in-house EMC precompliance testing a simple reality, including preprogrammed, automated measurements, interactive software and automatic re-measure functions for consistent, repeatable results. Automatic EMI measurements Frequency range: 9 kHz to 3.0 GHz Resolution bandwidth: 10 Hz to 3 MHz in a 1, 3, 10 sequence Phase noise: -90 dBc/Hz (10 kHz); -131 dBc/Hz (1 MHz) Dynamic range: -150 dBm to +30 dBm 1.5 dB overall amplitude accuracy Built-in counter Color active matrix display 3.5" disk drive N(f) input connector 50 ohm input impedance Auto-Selectable 90-132/195-250 Vac; 47-440 Hz operation or 12-20 Vdc Weight: 33 lb; Size: 222 mm (8.75 in)H x 373 mm (14.7 in)W x 409 mm (16.1 in)D



(From Used-Line T&M Specifications )
  Keysight Technologies (Agilent HP) E7402A Specs (98.4 KB)
Low end frequency limit  100.00 Hz 
High end frequency limit  3.00 GHz 
Resolution Bandwidth Min.  1 Hz 
Resolution Bandwidth Max.  3.00 MHz 
Amplitude Range  DANL to maximum safe input level.  
Status Discontinued
Discontinuance Date Dec-2011
Alternative N6141A EMC measurement application with N9030A, N9020A, or N9010A; W6141A EMC measurement application with N9000A.

The E7402A EMC standard analyzer provides the capabilities you need in an analyzer to make in-house EMI precompliance testing a reality.

The EMC standard analyzer offers you the best value with more productivity options built-in, and guarantees the fast delivery.

 Radiated emissions When combined with a broadband antenna, the E7402A provides the capabilities to check for radiated emissions coming from your DUT. This is best done in an area that is free from reflective objects such as an open area or EMI chamber.

Conducted emissions Test for noise or interference placed on power or data lines by coupling the E7402A instrument to the power or data line through a line impedance stabilization network (LISN) device or absorbing clamp.

Diagnostics and problem isolation If you have an emissions problem, you can use the E7402A with an 11940A or 11941A close field probe to isolate and diagnose the source of the problem.

The E7402A can be purchased separately or as part of the 84115EM Precompliance System.

  • Automatic EMI measurements
  • Compatible with the E7415A software
  • Also compatible with the Benchlink Web Remote software
  • Log sweep
  • 3.5" disk drive
  • 5 minute warm-up
  • Built-in preamplifier
  • Optional tracking generator
  • Rugged, portable design
  • SCPI programming and IVI COM driver support


To:  Test Equipment Connection Corp.
All fields are required
 Remember me
 Send me a copy.
News, sales, & auction announcements
About the Seller
since 2000

Test Equipment Connection Corp.

Visitors viewed Test Equipment Connection Corp. ads in the last 30 Days.

The dealer's latest update: 1 days ago

30 Skyline drive Lake Mary 32746 FL USA  
More about this seller »

Sales Conditions:

Trade terms only with approved credit. We accept wire transfer and PayPal. Credit cards only from USA customers please.

Some of the services we offer:

(Rentals) (Calibration) (Repair) (Market place)

Similar Listings: