LeCroy WaveSurfer 42Xs

Price : Call
  •  Equipment Location : USA
Description:
LeCroy   X-Stream Windows-Based Oscilloscope200 MHz to 1 GHz Bandwidth2.5 GS/s (up to 5 GS/s for 1 GHz)Big 10.4" LCD DisplaySmall 6" footprint

Refurbished

PRODUCT SPECS

(From Used-Line T&M Specifications )
  LeCroy (Teledyne LeCroy) WaveSurfer 42Xs-A Specs (1009.9 KB)
Bandwidth  400.0 MHz 
Channels  2  
Sample Rate  2.50 GSa/sec 
Memory Depth  5 Mpts/Ch  
Status -
Launch Date Feb-2009
See also WaveSurfer 44Xs-A, WaveSurfer 62Xs-A, WaveSurfer 64Xs-A, WaveSurfer 104Xs-A, WaveSurfer 24Xs-A

The WaveSurfer Xs-A has a small form factor which packs a powerful processor that can handle long memory captures faster than any of the competition. The touch screen interface is the ultimate in ease-of use. With features like WaveStream fast viewing mode and WaveScan Search and Find, you can be confident that every problem can quickly be detected and analyzed.

Beyond these great features, the WaveSurfer offers a wide range of serial data trigger and decode tools for SPI, I2C UART, RS-232, LIN, or CAN as well as industry leading mixed signal capabilities to quickly troubleshoot embedded system designs. With bandwidths from 200 MHz to 1 GHz the WaveSurfer is the ideal oscilloscope for everyday design and debug.

The WaveSurfer was designed to shorten debug time through faster hardware and more sophisticated software. The hardware allows for fast processing of long memory even when using math and measurement functions. The software is designed to respond immediately to the user’s input even while processing data, eliminating any lag or delay.

Searching for data is very helpful, but wouldn’t it be better to Search for something you cannot trigger on? WaveScan allows searching in a single acquisition using more than 20 different modes. Or, set up a Scan condition and scan for an event over hours or days, and perform some action when it is found.

With 5 Mpts/Ch (10 Mpts/Ch with MXs-A) of fast acquisition memory standard the WaveSurfer provides long capture time at full sample rate, and longer times at lower sample rates. WaveSurfer long memory is also thoughtfully designed to respond quickly, even when measurements, math, or serial decoders are being used.

WaveStream provides a vibrant, intensity graded (256 levels) display with a fast update to closely simulate the look and feel of an analog oscilloscope. Turn WaveStream ON or OFF, and adjust intensity, using the front panel knob. Use it only when you want to.

Keep your testing efficient with a thoughtfully designed user interface that provides the busy engineer with a GUI that is smooth, transparent, and easy to use. Use the touch screen to quickly access all triggers, math functions and measurement parameters or to “draw a box” around the area of interest and zoom all channels to the desired area.

Save time when working with embedded controllers by adding high-performance mixed signal capability to the WaveSurfer. Capture digital signals up to 500 MHz with up to 50 Mpts/Ch memory, 2 GS/s and 18 or 36 channels. Quickly and easily isolate specific serial data events with optional I2C, SPI, UART, CAN and LIN trigger and decode capabilities.

The ZS Series of high impedance active probes provide full bandwidth at the probe tip, and the high impedance (1 MO || 0.9 pF) you want. A variety of standard and available probe tip and grounding accessories are offered to meet any requirement. What’s more, ZS Series probes are available for a very affordable price. Use the ZS1000 with 200 to 600 MHz WaveSurfers and the ZS1500 with 1 GHz WaveSurfers to give full system bandwidth at the probe tip.

  • 200 MHz, 400 MHz, 600 MHz and 1 GHz bandwidths
  • 2.5 GS/s Sample Rates per Channel, up to 5 GS/s with WS 104Xs-A
  • 5 Mpts/Ch Memory
  • Fast Processing of Long Memory and Math
  • Responsive User Interface
  • WaveStream™ Fast Viewing Mode
  • WaveScan™ – Advanced Search and Find
  • Bright 10.4" Touch Screen Display
  • Only 15 cm (6") Deep - The most space-efficient oscilloscope for your bench from 200 MHz to 1 GHz
  • Local Language User Interface - Select from 10 language preferences. Add a front panel overlay with your local language
  • LXI Compliant

Note: The 42Xs-A replaces the 42Xs, which was originally released in February 2006.

CONTACT THE SELLER (RFQ)


To:  Test Equipment Connection Corp.
 
All fields are required
 Remember me
 Send me a copy.
Send
News, sales, & auction announcements
About the Seller
since 2000



Test Equipment Connection Corp.


1447
Visitors viewed Test Equipment Connection Corp. ads in the last 30 Days.


The dealer's latest update: 15 hours ago


30 Skyline drive Lake Mary 32746 FL USA  
More about this seller »


Sales Conditions:

Trade terms only with approved credit. We accept wire transfer and PayPal. Credit cards only from USA customers please.

Some of the services we offer:

(Rentals) (Calibration) (Repair) (Market place)

Similar Listings: