Used Keysight (Agilent/HP) 86222B for sale by Rosenkranz Elektronik | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement T&M Oscillators Keysight (Agilent/HP) 86222B

Keysight (Agilent/HP) 86222B

105 Visitors viewed Rosenkranz Elektronik ads in the last 30 Days

Send Request
  • €689

Send to a Friend
Flag of GermanyEquipment Location: Germany      
View Description>
Hide Description

Description of Keysight (Agilent/HP) 86222B

Categories: T&M, Oscillators

Manufacturer: Keysight Technologies (Agilent HP)

Model: 86222B

Condition: Used

Seller: Rosenkranz Elektronik

Keysight (Agilent/HP) The 86222B Sweep Oscillator Plug-In covers from 10 MHz to 2.4...

The 86222B Sweep Oscillator Plug-In covers from 10 MHz to 2.4 GHz
with continuous sweeping capability.
Internally leveled flatness of ±0.25 dB over full range.
Basic accuracy in CW mode is ±10 MHz and ±15 MHz in all sweep modes.
Maximum leveled power of 13 dBm (20 mW), typically 15 dBm.
Power level accuracy of ±1 dB.
Frequency response of 150 kHz, typically.
For use in the 8620C Mainframe.

Product specifications of Keysight (Agilent/HP) 86222B (From Used-Line T&M Specifications)

  • Launch Date Jan-2049
  • Alternative E4428C ESG Analog Signal Generator
  • See also 86222A
  • Status Discontinued by Manufacturer

The HP 86222A and 86222B RF plug-ins provide CW or continous swept frequency coverage from 10 MHz to 2.4 GHz. Power output is calibrated from 0 to +13 dBm in 1 dB increments with ±0.25 dB flatness and excellent linearity over the entire range.

The 86222B features a crystal marker system that provides a comb of markers at 1, 10, or 50 MHz. Markers can be displayed as intensified spots on a CRT or as amplitude dips on the RF output. When the output frequency is coincident with a 50, 10, or 1 MHz comb of the crystal oscillator, a front panel LED lights for independent CW frequency calibration.

  • Frequency range: 10 MHz to 2.4 GHz in one continuous sweep
  • Internally leveled flatness: ±0.25 dB over full range
  • Maximum leveled power: >20 mW (+13 dBm)
  • Residual AM in 100 kHz BW: <-50 dBc
  • Spurious signals (harmonics): <-25 dBc at +13 dBm
  • Spurious signals (non-harmonics)
    • 0.01 to 2.3 GHz: <-30 dBc at +13 dBm
    • 2.3 to 2.4 GHz: <-25 dBc at 13 dBm
  • Broadband noise in 100 kHz bandwidth: <-70 dBm typical
  • External AM modulation
    • Input impedance: ~10 kΩ
    • Frequency response: Typically, 150 kHz
    • Square wave response on/off ratio: >30 dB
    • Attenutation for +6 V input: >30 dB
  • Internal AM modulation: 1 kHz square wave on/off ratio: >30 dB
  • External FM modulation - Maximum deviations for modulation frequencies
    • DC to 100 Hz: ±75 MHz
    • 100 Hz to 1 MHz: ±5 MHz
    • 1 MHz to 2 MHz: ±2 MHz
  • Internal crystal markers: Harmonic markers of 10 and 50 MHz usable over full 0.01 to 2.4 GHz range and 1 MHz markers usable from 0.01 to 1 GHz. Positive or negative output pulses can be selected to Z-axis intensify a scope trace; or RF amplitude pips can be selected at maximum sweep speed with pulse width optimized for ~10 markers/sweep
  • Typical marker width around center frequency
    • 1 MHz markers: ±75 kHz
    • 10 MHz markers: ±200 kHz
    • 50 MHz markers: ±300 kHz
  • Marker output
    • Positive intensity mode: Nominally >3 V
    • Negative intensity mode: Nominally -3 to -8 V
    • Amplitude mode: Typically 0.5 dB, internally adjustable

View Similar Listings
Hide Similar Listings

Listings similiar to Keysight (Agilent/HP) 86222B

About Rosenkranz Elektronik

Logo of Rosenkranz Elektronik
Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later