Keysight 8516A

Price : Call
Picture of Used-Line
  •  Equipment Location : USA
Keysight 8516A Opts: 001/003

Option: 001/003


(From Used-Line T&M Specifications )
Status Discontinued
Alternative E8363C PNA Series Microwave Network Analyzer, 10 MHz to 40 GHz, E8363B PNA Series

The HP 8516A is an S-parameter test set for the 8510B.

The 8516A test set has a dual port architecture, which develops a separate reference channel for each incident port. RF switching is done with a single built-in electronic switch. For active device measurements, the test sets include the ability to apply DC bias (external) to the test port center conductors. Also available are two 60 dB step attenuators, which allow control of the port 1 and port 2 signal levels.

The 8516A test set is coupler-based. Two alternate coupler configurations are available. The standard configuration is symmetrical and has identical dynamic range performance in both forward and reverse transmission measurements. The port 1 step attenuator allows reduction of the port 1 output power for forward measurements, and the port 2 attenuator allows reduction of the port 2 output power for reverse measurements.

With the Option 003 configuration, the port 2 coupler is reversed. For forward measurements, the port 2 signal is sampled directly through the main arm of the port 2 coupler. Since coupling loss is removed, dynamic range is increased in the forward direction. Since the port 2 step attenuator is inline with the port 2 sample, the power incident on port 2 may be reduced. With Option 003, up to 1 W may be input into port 2.

  • Frequency range: 45 MHz to 40 GHz
  • Attenuation range: 0 to 60 dB
  • Impedance: 50 Ω, nominal
  • DC bias: 500 mA, 40 Vdc maximum
  • Connector type: 2.4 mm (M)
  • 8510B multiple test set configurations
    • IF switching (Option 001 required in one of the test sets): The 20 MHz IF signal is daisy-chained from the test sets to the 8510
    • RF switching: The RF signal must be routed to the desired test set using a 33311C coaxial RF switch and a 11713A switch driver. The switch driver is controlled automatically by the 8510B over the 8510 system interface.
  • Options
    • Option 001: Add IF switching
    • Option 002: Delete step attenuators and bias tees
    • Option 003: High forward dynamic range


To:  Liberty Test Equipment, Inc.
All fields are required
 Remember me
 Send me a copy.
News, sales, & auction announcements
About the Seller
since 2006

Liberty Test Equipment, Inc.

Visitors viewed Liberty Test Equipment, Inc. ads in the last 30 Days.

The dealer's latest update: over 30 days

1640 Lead Hill Blvd. Suite 120 Roseville 95661 CA USA  
More about this seller »

Sales Conditions:

END USERS ONLY! 10-day right of return, 12-month warranty, around-the-clock NIST traceable/ISO registered lab & all standard accessories. Pricing and availability are subject to change. Many payment options, terms, credit card, checks, lease terms, rental, etc.

Some of the services we offer:

(Rentals) (Calibration) (Repair) (Manuals) (Market place)

Similar Listings: