SKU: PHT-3300
Weight: 4.00 LBS
The PHT-3300 Mini-Integrated Portable Hardness Tester is suitable for testing the hardness of all metals and is distinguished by its very compact size, high accuracy, wide measuring range and simplicity of operation. This tester comes with a built-in "D" Impact Device which is the best choice for most testing applications. The PHT3300 automatically converts all Vickers, Brinell, Rockwell, and Shore hardness values. The USB output enables this model to print any of its memory from up to 500 groups. Need to test sideways or even on the bottom of a part? No problem. The impact direction can be set to achieve any angle, even upside down! Statisticle mean value is automatically provided. The Phase II PHT-3300 Comes Complete with a Calibrated Test Block, USB cable, Software, Rugged Carry Case and Operation Manual.
Meets ASTM A956-06 Specifications
Call or email for shipping quote outside of the continental USA.
Which scales can this tester convert to?
Test results can easily convert to the more popular hardness scales: Rockwell (HRB & HRC), Brinell (HB), Vickers (HV), Shore, etc...
How thick does the part have to be?
For testing large hard parts such as tool steel, the thickness should be close to 1" thick or more. If the test piece is coupled, it is possible to test down to a 3mm thickness.
How easy is it to operate?
The PHT-3300 is simple to operate. First you need to load the impact device by simply cocking it. This moves the impact body, which is within the impact device, into the start position. Next, place the impact device onto the surface of your test piece. Finally, push the button on top of the impact device to initiate test and obtain reading.
What do I get in this package?
Standard accessories are: Tester w/built-in Impact Device "D", Calibrated Test Block, Software, Custom Carry Case, Cleaning Brush, and Operation Manual.
What optional accessories are available?
- A 12 piece Universal Support Ring Set is available for use on concave or convex parts (minimum radius of test piece curved surface without support ring: 1.2" (30mm) or 7/16" (11mm) with support ring).
Functions:
- Simple to use keypad
- USB output
- Auto conversion to commonly used scales
- Auto mean value
- Battery indicator
- 500 group memory capacity
Technical Specifications & Features for the PHT-3300:
|
Dimensions:
|
6.10” x 2.36” x 1.49” (155 X 60 X 38mm)
|
Impact Device:
|
D
|
Impact Energy:
|
8 Ft-Lbs (11nmm)
|
Test Tip:
|
Tungsten Carbide
|
Measuring Accuracy:
|
+- 0.8% (Corresponding To +- 1 Hrc At Hrc=58)
|
Max. Hardness Of Sample:
|
980hv
|
Weight:
|
0.48lb (220g)
|
Impact Direction:
|
Any Angle
|
Operating Temperature:
|
32 To 122 Degrees F (0 To 50 Degrees C.)
|
Min. Weight Of Sample:
|
11 lbs / 5kg
|
Min. Radius Of Curved Surface:
|
1.2in (30mm) (With Support Rings:11mm)
|
Power Supply:
|
3.6V Lithium Rechargeable Battery
|
Measuring Range
|
200-960 HL
|
Features:
|
Data memory:
|
Up to 500 Groups
|
Output:
|
USB 1.1
|
Note: General Information provided below about the different impact devices available. The PHT-3300 has a built-in impact device and the following impact devices will not work with this unit.