Used Agilent HP 11970W for sale by Chrent Technology Corp | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Mixers Harmonic Mixers Agilent HP 11970W

Agilent HP 11970W

Send Request
  • $1000

Send to a Friend
Flag of ChinaEquipment Location: China      
View Description>
Hide Description

Description of Agilent HP 11970W

Categories: Mixers, Harmonic Mixers

Manufacturer: Keysight Technologies (Agilent HP)

Model: 11970W

Condition: Used

11970W Keysight (Agilent)75-110 GHz waveguide harmonic mixer

Product specifications of Agilent HP 11970W (From Used-Line T&M Specifications)

The Agilent 11970W waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required.

The 11970 series of mixers has been designed for a local oscillator frequency of 3 to 6.1 GHz. Accurate absolute amplitude measurements can be made by using the conversion loss calibration chart of the mixer. The SWR of the waveguide input is typically 2.2:1 to further minimize measurement uncertainty. The combination of high gain-compression level and low conversion loss provides the maximum dynamic range for measuring input signals.

The 11970W extends the frequency range of the Agilent E4440A/46A/48A PSA Series high-peformance spectrum analyzers, the Agilent E4407B ESA-E Series portable spectrum analyzer, the Agilent 8560 E-Series portable spectrum analyzers, the Agilent 8566B spectrum analyzer (used with the Agilent 11975A amplifier), and the Agilent 70000 modular measurement system (used with the Agilent 70907A/B external mixer interface modules).

  • IF range: DC to 1300 MHz
  • Frequency range: 75 to 110 GHz
  • LO amplitude range: +14 to +18 dBm
  • LO harmonic number: 18-
  • Typical RF input SWR: <2.6:1
  • Typical odd-order suppression: >15 dB
  • Maximum CW RF input level: +20 dBm (100 mW)
  • Maximum peak pulse power: +24 dBm (250 mW)
  • Spectrum analyzer noise (1 kHz BW): -85 dBm
  • Typical gain compression: -1 dBm
  • Flat frequency response of  ±3.0 dB
  • Low conversion loss of 46 dB maximum
  • No bias or tuning adjustments
  • 100 mW safe input level
  • Rugged, and easy to use

View Similar Listings
Hide Similar Listings

About Chrent Technology Corp

Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later