Digital Power Meter Main Unit DC 0.5Hz-1MHz,
Model 760101 with options:
03 = 50A input element, 3 elements and
C1 = GPIB interface
The WT1600 is power meter designed for measurement of extremely small currents in energy-saving equipment, as well as measurement of large currents for evaluating large-sized loads.
It has two different input elements. A 5 A input element is provided for measuring extremely small currents, while a 50 A input elements saves to measure large currents.
Both of the elements can be installed together in the WT1600.
The current for the 5 A input element can be set as low as 10 mA for measuring extremely small currents in ernergy-saving equipment.
The WT1600 works with voltages ranging from 1.5 V up to 1000 V, supporting a wide range of applications. Because it can accept signal inputs for up to six phases, a signal WT1600 unit can measure I/O signals on inverters.
A single WT1600 unit can make up to six different power measurements (six input each for voltage and current).
With the measure start-stop function (synchronized measurement), two WT1600 units (12 inputs) can be synchronized.
Frequency range: DC 0.5 Hz to 1 MHz
Basic accuracy: ±0.1%
Two input elements:
5 A input element:
10/20/50/100/200/500 mA, 1/2/5 A (DC 0.5 Hz to 1 MHz)
50 A input element:
1/2/5/10/20/50 A (DC 0.5 to 100 kHz)
Current sensor input range (same for 5 A and 50 A input elements; standard)
50/100/250/500 mV, 1/2/5/10 V (DC 0.5 to 500 kHz)
Voltage input range: 1.5 V to 1000 V
Data storing intervall: 50 ms (20 times per second)
Up to six input elements in one Instrument
High precision and wide bandwidth
Increased assured-accuracy range for high-precision measurements
A variety of display formats
Display harmonic data as bar graphs, vectors, and lists
Integration function capable of handling rapid changes in input signal
Standard external current sensor input for use with current clamps
Built-in printer (optional)
A variety of interfaces (optional)
€ 5,400 (net) $6,804 (US)