4-Channel Digital Serial Analyzer 16GHz 50GSa/s, 100fs Resolution
w/ options:
2XL = 20MSa/Channel;
MTH = Mask Testing for Serial Standards up to 4.25Gb/s, incl. Hardware Clock Recovery;
PTH = Protocol Triggering / Decode for 8b/10b- encoded Serial Signals up to 3.125Gb/s, incl. Hardware Clock Recovery and Pattern Lock Triggering
ASM =Advanced Event Search / Mark
DJA = DPOJET Jitter / Eye Diagram Analysis
The Tektronix DSA71604B is a Digital Serial Analyzer with a bandwidth of 16 GHz,
4 channels and a member of the DSA70000B series
The DPO70000B and the DSA70000B Series are real-time digital phosphor oscilloscopes and are the industry’s best solution to the challenging signal integrity issues faced by designers verifying, characterizing, debugging, and testing sophisticated electronic designs.
The specialized DSA70000B Series provides a complete and dedicated solution to address the challenges of high-speed serial designs.
Bandwidth: 16 GHz on all 4 channels simultaneously
Sample rate (real-time): up to 50 GSa/s
Record length: up to 250 Megasamples with MultiView Zoom, standard configuration for DSA71604B 20 M on all channels
Rise time (10% to 90%): 24.5 ps
Rise time (20% to 80%): 17 ps
Input coupling: DC (50 ohms), GND
Input impedance: 50 ohms +/- 2%, 1 Mohm with TCA-1MEG adapter
Input sensitivity (18 GHz and below): 10 mV/div to 500 mV/div (100 mV to 5 V full scale)
Vertical resolution: 8 bit (11 bit with averaging)
Max. Input voltage: <5 V rms for >= 100 mV full scale, also determined by TekConnect accessory
Time base range: 10 ps div to 1000 s/div
Time resolution in ET/IT mode: 100 fs
Jitter noise floor: 300 fs
Fastest waveform capture rate: >300,000 wfms/s max. per channel
Digital serial analyzer models with dedicated configuration for high-speed serial design and compliance testing
Enhanced bandwidth to the probe tip extended to support multiple bandwidth steps for advanced signal integrity
Pinpoint triggering, with over 1400 combinations
Unique serial pattern triggering: up to 3.125 Gbps and 8b/10b standard
Protocol triggering for isolation of pattern-dependent effects and NRZ serial test pattern triggering: up to 6.25 Gbps
Serial data analysis and compliance: PCI Express, Serial ATA, FB-DIMM, SAS, Fiber Channel, IEEE1394b, RapidIO, XAUI, HDMI, DVI, Ethernet, USB 2.0
High-speed serial data link analysis for transmitter channel embed or de-embed and receiver equalization emulation
Most popular jitter, timing, and eye-diagram analysis package
DDR memory bus Analysis
Display: 12.1-in. large XGA Touchscreen
Event search and mark
MyScope custom Windows and right mouse click menus
OpenChoice software with Microsoft Windows XP OS enables built-in networking and extended Analysis
Applications:
Signal integrity, jitter, and timing Analysis
Verification, debug, and characterization of sophisticated designs
Debugging and compliance testing of serial data streams for Telecom and Datacom industry Standards
Investigation of transient phenomena
Spectral Analysis
€ 49,000 (net) $61,740 (US)