Used Agilent AGI-83712A for sale by Avalon Test Equipment | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Generators Synthesized CW Generators Agilent AGI-83712A

Agilent AGI-83712A

60 Visitors viewed Avalon Test Equipment ads in the last 30 Days

Send Request
  • $5750

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent AGI-83712A

Categories: Generators, Synthesized CW Generators

Manufacturer: Keysight Technologies (Agilent HP)

Model: 83712A

Condition: Used

Seller: Avalon Test Equipment

Keysight/Agilent 83712A Synth CW Gen, 10MHz to 20GHz

Condition: Refurbished
Availability:

  • Immediate Purchase
  • Quote to Rent/Lease
  • Quote to Purchase

    • Description

    Keysight/Agilent 83712A 10MHZ-20GHZ SYNTH CW GEN

    The 83712A Synthesized CW Generator is ideal for local oscillator and exciter applications. High output power and exceptional signal purity are combined with broad frequency coverage in this performance-packed synthesizer. Fundamental oscillators and switched low-pass filters deliver <-55 dBc harmonics, eliminate subhermonics, and suppress spurious to <-60 dBc. This generator is the recommended local oscillator for use with the 8970B noise meter. All front panel functions are completely HP-IB programmable and SCPI compatible.

    Features:

    • High stability time base for frequency accuracy
    • Low SSB phase noise for out-of-channel tests
    • High power output for driving the LO port of mixers
    • Low output power with option 1E1 for receiver sensitivity and SINAD measurements

    Product specifications of Agilent AGI-83712A (From Used-Line T&M Specifications)

    • Launch Date Jan-2049
    • Alternative E8257D PSG Analog Signal Generator
    • Status Discontinued by Manufacturer

    The HP 83712A synthesized CW generator has a carrier frequency range of 10 MHz to 20 GHz.

    • Frequency
      • Range: 0.01 to 20.0 GHz
      • Resolution: 1 kHz, 1 Hz with option
      • Aging rate: <1.0 x 10-8/day after 72 hours, <1.5 x 10-9/day after 24 hour warmup - with option
      • Frequency switching time: <50 ms to within 1 kHz
    • RF output
      • Maximum leveled output power: +13 dBm at 0.01 - 1 GHz, +11 dBm at 1-20 GHz (+10 dBm with option)
      • Minimum leveled output power: 0 dBm, -90 dBm with option
      • Display resolution: 0.01 dB
      • Flatness: ±0.5 dB for power ≥-90 dBm, ±0.7 dB for power <-90 dBm (The use of Type-N RF connectors above 18.0 GHz degrades specification typically by 0.2 dB)
      • Level switching time: <17 ms (without step attenuator range change)
      • Output SWR: <2.0:1 nominal
    • Harmonics: <-55 dBc at output levels <+6 dBm, 0.01 to 1 GHz; <-50 dBc at output levels <+6 dBm, 1 to 20 GHz
    • Non-harmonic spurious: <-60 dBc (≥3 kHz), <-50 dBc (<3 kHz)
    • Residual FM: At 1 GHz, <15 Hz in 50 Hz to 15 kHz bandwidth. Residual FM decreases 6 dB per octave below 1 GHz
    • AM noise floor: (at 0 dBm and offsets greater than 5 MHz from carrier) <-150 dBm/Hz, 1-20 GHz; <-140 dBm/Hz, 0.01-1 GHz
    • Front panel connectors
      • RF Output: The standard front panel RF Output connector is a Type-N precision connector. When Option 1E9 is installed, this front panel connector is a 3.5 mm precision connector. The nominal source impedance is 50 Ω
      • ALC In: This front panel BNC connector allows the synthesizer to be externally leveled. It is used with external power meter leveling or external diode leveling. The leveling signal at this input must be in the ±1 V range. The nominal input impdeance is 150 Ω. The damage level is ≥+12 V or ≤-12 V
    • Rear panel connectors
      • 10 MHz Input: Accepts a 10 MHz ±100 Hz, 0 to +10 dBm, external reference signal for operation from an external high stability timebase. Nominal input impedance is 50 Ω
      • 10 MHz Output: Outputs the 10 MHz reference signal, nominally at +3 dBm, for use as an external reference signal. Nominal source impedance is 50 Ω
      • 0.5 V/GHz Output: Supplies a voltage proportional to output frequency for use with mm-wave frequency multipliers, including the 83550 Series Millimeter Wave Source Modules
    • Options
      • 1E1: Output Step Attenuator
      • 1E2: Internal AM and FM/ΦM sources
      • 1E5: High stability timebase
      • 1E8: 1 Hz frequency resolution
      • 1E9: 3.5 mm RF output connector (male APC-3.5)

    View Similar Listings
    Hide Similar Listings

    Listings similiar to Agilent AGI-83712A

    About Avalon Test Equipment

    Logo of Avalon Test Equipment
    Send to a Friend

    Recently Viewed Products

    Wait! Don’t go yet!

    You have {{cartItems.length}} items in your Request cart.
    Would you like to send a Request to the Sellers before you leave?
    Remind me later