Used Agilent 33511B for sale by Test Equipment Depot | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Generators Multifunction Generators Agilent 33511B

Agilent 33511B

Send Request
Agilent 33511B
  • $2595

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent 33511B

Categories: Generators, Multifunction Generators

Manufacturer: Keysight Technologies (Agilent HP)

Model: 33511B

Condition: Used

Hp / Agilent / Keysight 33511B 20 MHz, 1-Channel Trueform Arbitrary Waveform Generator, Refurbished

20 MHz, 1-Channel Trueform Arbitrary Waveform Generator, Refurbished
Condition: Refurbished

Product specifications of Agilent 33511B (From Used-Line T&M Specifications)

  • Launch Date Aug-2012
  • Sampling Rate 160 MSa/sec
  • Record Length 1 Mpts memory, option for 16 Mpts
  • Vertical Resolution [Bit] 16
  • Output Voltage Range 1 mVpp to 10 Vpp amplitude
  • Channels 1
  • Status --

The Agilent 33500B waveform generators with Trueform signal generation technology, offer a new alternative that blends the best of Direct Digital Synthesis (DDS) and point-by-point architecture, giving you the benefits of both. Trueform technology uses an exclusive digital sampling technique that delivers unmatched performance at the same low price you are accustomed to with DDS.

The models in the 33500B series provide the lowest jitter and lowest total harmonic distortion in their class, giving engineers the ability to generate the exact signals they need. With better jitter performance, engineers can place edges more accurately, helping them reduce timing errors in their circuit designs. With total harmonic distortion less than 0.04 percent and non-harmonic spurs less than 75 dBc, the 33500B Series offers clean signals that do not introduce noise, enabling users to get more accurate results.

The 33500B Series 8.4-ns rise and fall times and low jitter allow engineers to set trigger points more accurately as well. The 16 bits of resolution allows engineers to make output changes down to 1 µV - giving them the ability to test the low-voltage circuits and designs of today.

With the 33500B Series, engineers can take advantage of easy software upgrades to expand the instrument capabilities when they need to increase bandwidth and add true point-by-point arbitrary waveforms and deeper waveform memory.

  • Unmatched capabilities for generating a full range of signals for your most demanding measurements
  • Sine waves with 5x lower harmonic distortion for more pure signals
  • Pulses up to 20 MHz with 10x less jitter for more precise timing
  • Optional point-by-point arbitrary waveform capability with sequencing for more accurate representation of user-defined signals
  • 160 MSa/s sampling rate for higher time resolution arbitrary waveforms
  • 16-bit resolution with 1 mVpp to 10 Vpp amplitude for greater amplitude accuracy
  • 1 MSa/channel standard waveform memory, optional 16 MSa/channel for your longest waveforms
  • USB, LAN (LXI-C), GPIB standard for quick and easy connectivity to PC or network
  • Unique features of the 33500B Series
    • Waveform summing and combining capability: Allows engineers to easily add noise to signals for margin and distortion testing using only a single channel. On a two-channel model, engineers can sum and combine up to four signals
    • Variable-bandwidth noise: Allows engineers to adjust the bandwidth of the built-in noise generator to control the frequency content of their signals
    • Waveform sequencing: Allows engineers to create multiple configured waveforms with several common segments. Users can also build long, complex waveforms using minimal instrument memory
    • Pseudo-random binary sequence pattern generation: Allows engineers to test digital serial buses by streaming standard PRBS patterns - like PN7 and PN19 - without the need for a separate pulse generator
    • Optional baseband IQ player: Allows wireless communication engineers to economically play IQ signals without the need for an expensive signal generator. The IQ player provides the ability to make adjustments to the signal, including amplitude gain, channel offset and channel skew as needed for a more accurate representation
    • 2-channel models: Dual channel coupling, frequency and amplitude, equal and inverted, set start phase for each channel, set phase shift between channels

33511B specifications:

  • Number of channels: 1
  • Bandwidth: 20 MHz
  • Wavefoms
    • Sine, square, ramp, pulse, triangle, Gaussian noise, PRBS (Pseudorandom Binary Sequence), DC
    • Built-in arbitrary: Cardiac, exponential fall, exponential rise, Gaussian pulse, Haversine, Lorentz, D-Lorentz, negative ramp, sinc
    • User-defined arbitray: Up to 1 MSa (16 MSa with Option MEM) with multi-segment sequencing
  • Operating modes: Continuous, modulate, frequency sweep, burst, output gate
  • Modulation: AM, FM, PM, FSK, BPSK, PWM, Sum (carrier + modulation)
  • Arbitrary waveform characteristics
    • Waveform length: 8 Sa to 1 MSa per channel (16 MSa with Option OCX) in increments of 1 sample
    • Voltage resolution: 16 bits
    • Bandwidth (-3 dB, nom): Filter Off: 40 MHz; “Normal” Filter On: 0.27 x (Sample Rate); “Step” Filter On: 0.13 x (Sample Rate)
    • Rise and fall time: 0.35 / Bandwidth (10 ns min) with "Normal" or "Step" filter On
  • Waveform sequencing
    • Operation: Individual arbitrary waveforms (segments) can be combined into user-defined lists (sequences) to form longer, more complex waveforms. To improve throughput, up to 32 sequences totaling up to 1,024 segments can be preloaded into volatile memory
    • Segment length: 8 Sa to 1 MSa per channel (16 MSa with Option MEM) in increments of 1 sample
    • Sequence length: 1 to 512 steps
    • Segment repeat count: 1 to 1x106, or infinite
  • Output
    • Connector shells for channel output(s), Sync, and Mod In are connected together but isolated from the instrument’s chassis. Maximum allowable voltage on isolated connector shells is ±42 Vpk
    • Amplitude range: 1 mVpp to 10 Vpp into 50 Ω; 2 mVpp to 20 Vpp into open circuit
  • Sync/Marker output
    • Connector: Front-panel BNC, isolated from chassis
    • Functions: Sync, sweep marker, burst marker, or arbitrary waveform marker
    • Polarity: Normal or inverted
    • Voltage level (nom): 3 Vpp into open circuit, 1.5 Vpp into 50 Ω
    • Output impedance (nom): 50 Ω
    • Minimum pulse width (nom): 16 ns
  • External trigger/gate
    • Connector: Rear-panel BNC, chassis-referenced
    • Function: Input or output
    • Polarity: Positive or negative slope
    • Voltage level (nom): 0 V to 0.4 V for low, >2.3 V for high, 3.5 V maximum (as input), 3 Vpp (nom) into open circuit, 1.5 Vpp (nom) into 50 Ω (as output)
    • Impedance (nom): 10 kΩ, DC-coupled (as input), 50 Ω (as output)
    • Fanout: ≤4 total Agilent 33500B Series waveform generators
  • Modulation input
    • Connector: Rear-panel BNC, isolated
    • Voltage level: ±5 V full-scale
    • Input impedance (nom): 5 kΩ
    • Bandwidth (-3 dB, typ): 0 Hz to 100 kHz
  • Real-time clock/calendar: Set and read - year, month, day, hour, minute, second; Battery - CR-2032 coin-type, replaceable, >5 year life (typ)
  • Computer interfaces
    • LXI- C (rev1.3): 10/100Base-T Ethernet (Sockets & VXI-11 protocol); USB2.0 (USB-TMC488 protocol); GPIB/IEEE-488.1, IEEE-488.2
    • Web user interface: Remote operation and monitoring
    • Programming language: SCPI-1999, IEEE-488.2; Agilent 33210A / 33220A compatible
    • Graphical display: 4.3" Color TFT WQVGA (480x272) with LED backlight

View Similar Listings
Hide Similar Listings

About Test Equipment Depot

Logo of Test Equipment Depot
Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later