Fully Functional Refrigerated Benchtop Centrifuge w/ Fixed-Angle Rotor
Protected by 90-Day Warranty
Fully tested and fully functional, this pre-owned Beckman Coulter Microfuge
22R refrigerated benchtop centrifuge offers reliable spinning for the budget-
and workspace-conscious lab.
Was it tested?
Yes.
During a 14,000 RPM run, this 22R stayed at -8°C. Outside of a run, it reaches
the manufacturer’s specification of -10°C.
This centrifuge initializes, runs, and stops flawlessly.
How was it serviced?
Our centrifuge specialist replaced the step switch and knobs with OEM parts from
Beckman Coulter.
Recharged Refrigeration System
To ensure the refrigeration is operating at manufacturer specification, our
technician performs a full evacuation of the refrigeration system and refills
the system with new refrigerant. The recharge process involves the following:
- Vent system of refrigerant
- Apply 250 micron vacuum to test for leaks, remove debris, and boil off
moisture in lines
- Nitrogen purge three times to clear lines for preventative maintenance
- Refill system with new refrigerant
- Confirm system is operating to manufacturer specification
How’s It Look?
Aside from a deep chip on the lid and along the edge of the chassis above the
interface, this centrifuge is in fantastic condition with almost no blemishes or
signs of use anywhere on the chassis.
What’s Included?
This centrifuge comes packaged with a Beckman Coulter F241.5P 45° fixed-angle
rotor and a power cable.
Experienced Centrifuge Dealer
New Life Scientific is no stranger to centrifuges. Over the past four years we
have worked on a wide variety of benchtop and floor centrifuges from leading manufacturers, including Beckman, Sorvall/Dupont/Thermo, and Eppendorf.
You can have confidence in our technical evaluations and our warranty knowing
that we have in-house technicians who inspect, test, service, and repair
centrifuges. After examination and thorough cleaning, these instruments often
leave our shop meeting manufacturer specs.
When you buy from us, you’re not just buying a centrifuge. You also gain a
resource for after-sales support, even after your warranty expires.
Includes a 90-Day Warranty for your Peace of Mind
Buying pre-owned can be unnerving. We know you want assurance in your purchase,
so we include a 90-day warranty with our equipment. If anything goes wrong, our
in-house support is only a phone-call away.
Support for Instrument Longevity
We also offer continued support, including consulting and technical questions.
We may be able to exchange or replace units in a pinch.
Manufacturer Specifications
Manufacturer
|
Beckman Coulter
|
Model
|
Microfuge 22R
|
Cat. No.
|
368826
|
Serial No.
|
MHB08J014
|
Max Speed
|
14,000 RPM
|
Max RCF
|
21,920 x g
|
Temperature Range
|
-10°C to +40°C
|
Temperature Control Accuracy
|
±2°C
|
Run Time Selection Range
|
0 to 30 min or Continuous Run
|
Ambient Temperature Range
|
+4°C to +35°C
|
Power Requirements
|
120V, 60Hz, 6.9A
|
Dimensions (W x D x H)
|
14.4” x 23” x 11.8” (26.5 x 58.5 x 30 cm)
|
Weight
|
90.4 lb (41 kg)
|
Rotor
Model No.
|
Type
|
Max RPM
|
Max RCF
|
Max Capacity
|
Rotor Manual No.
|
F241.5P
|
45° fixed angle
|
14,000
|
17,970 x g
|
24 x 2.2mL
|
MM-TB-001
|
Condition: Used
Returns: 30 day returns. Buyer pays for return shipping
Shipping: $285.00