Used HP Agilent Keysight 8970A for sale by Telnet | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Meters Noise Figure Meters Keysight Technologies (Agilent HP) 8970A For Sale HP Agilent Keysight 8970A

HP Agilent Keysight 8970A

Send Request
HP Agilent Keysight 8970A
  • £800

 Add to request cart
Send to a Friend
Flag of U.K.Equipment Location: U.K.      
View Description>
Hide Description

Description of HP Agilent Keysight 8970A

Categories: Meters, Noise Figure Meters

Model: 8970A

Condition: Used

Seller: Telnet

HP Agilent Keysight 8970A Noise Figure Meter

Description

The HP 8970A Noise Figure Meter, together with an appropriate noise source, automatically measures the noise figure and gain of the device to which it is attached. The Noise Figure Meter can be tuned between 10 and 1500 MHz. It can also be swept over all or any part of this range. To measure the noise figure of devices with output frequencies greater than 1500 MHz, an external mixer and local oscillator can be used to convert the frequency to the 10-1500 MHz range. Measured noise can be displayed as noise figure, equivalent input noise temperature, or Y-Factor. Gain is displayed in dB. Once calibrated, a single keystroke of the noise figure meter can automatically remove the measurement system noise and gain contribution. The noise figure analyzer then displays only the noise figure and gain of the DUT. The Excess Noise Ratio (ENR) of the noise source can be entered into the noise figure meter for up to 27 frequencies. The noise figure meter uses this data to correct for ENR versus frequency variations. Most functions can be remotely programmed via the Hewlett-Packard Interface Bus (HP-IB) and all measurement data is available to the HP-IB.

  • Noise figure measurement range: 0 – 30 dB
  • Noise figure measurement resolution: 0.01 dB
  • Gain measurement range: -20 to at least +40 dB
  • Gain measurement resolution: 0.01 dB, 0.1 dB
  • Input frequency range: Tunable from 10 to 1500 MHz
  • Input frequency resolution: 1 MHz
  • Maximum safe input level: +/- 20 Vdc; +20 dBm at RF

Product specifications of HP Agilent Keysight 8970A (From Used-Line T&M Specifications)

  • Launch Date
  • Alternative 8970B Noise Figure Meter, 10 MHz to 1600 MHz
  • Status Discontinued by Manufacturer

The HP 8970A Noise Figure Meter, together with an appropriate noise source, automatically measures the noise figure and gain of the device to which it is attached. The Noise Figure Meter can be tuned between 10 and 1500 MHz. It can also be swept over all or any part of this range. To measure the noise figure of devices with output frequencies greater than 1500 MHz, an external mixer and local oscillator can be used to convert the frequency to the 10-1500 MHz range. Measured noise can be displayed as noise figure, equivalent input noise temperature, or Y-Factor. Gain is displayed in dB. Once calibrated, a single keystroke of the noise figure meter can automatically remove the measurement system noise and gain contribution. The noise figure analyzer then displays only the noise figure and gain of the DUT. The Excess Noise Ratio (ENR) of the noise source can be entered into the noise figure meter for up to 27 frequencies. The noise figure meter uses this data to correct for ENR versus frequency variations. Most functions can be remotely programmed via the Hewlett-Packard Interface Bus (HP-IB) and all measurement data is available to the HP-IB.

  • Noise figure measurement range: 0 - 30 dB
  • Noise figure measurement resolution: 0.01 dB
  • Gain measurement range: -20 to at least +40 dB
  • Gain measurement resolution: 0.01 dB, 0.1 dB
  • Input frequency range: Tunable from 10 to 1500 MHz
  • Input frequency resolution: 1 MHz
  • Maximum safe input level: +/- 20 Vdc; +20 dBm at RF

View Similar Listings
Hide Similar Listings

Listings similiar to HP Agilent Keysight 8970A

Send a Request

To: Telnet
Optional Fields
            
            
            

{{ message }}

About Telnet

    Used-Line Dealer since : 2004

  • The dealer's latest update {{ GetUpdateBefore('4/22/2024 6:26:00 AM') }}
  • Click to view phone number
  • Click to view seller’s site
  • Used equipment for sale by Telnet (426)
  • U.K.
Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later