Rohde amp; Schwarz ZNA43 (1332.4500.44)

1098 Visitors viewed Electro Rent ads in the last 30 Days

Condition: Used
Vector Network Analyzer, 4 ports 10 MHz to 43.5 GHz, 2.92 mm (m) connectors; Direct source and recei
ZNA43-B501 (1332.5236.11) • Spur magnitude reduction for enhanced spectral purity with low RF output power, for Port 1. (Required: Ramp;S®ZNA43-B31, recommended: Ramp;S®ZNA43-B16, Ramp;S®ZNA43-B161, Ramp;S®ZNA43-B21)ZNA43-B21 (1332.4646.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA-B7 (1332.4546.02) • Memory extension for long time data recording, data streaming, extended pulse pattern recording for Ramp;S®ZNA (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for Ramp;S®ZNA (Hardware option)ZNA43-B22 (1332.4646.22) • Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for Ramp;S®ZNA Enables mmWave converter setups utilizing a Ramp;S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options Ramp;S®ZNA-B26, "Direct IF access", or Ramp;S®ZNA-B5, "2nd internal LO src". Used as general mixer LO: Requires Ramp;S®ZNA-B5, "2nd internal LO src") (Hardware option)•••ZNA43-B43 (1332.4781.43) • Internal pulse modulator for port 3 for Ramp;S®ZNA43 (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for Ramp;S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA-B4 (1332.4530.02) • Precision frequency reference for Ramp;S®ZNA (Hardware option)ZNA43-B31 (1332.4717.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for Ramp;S®ZNA (4 ports) external access up to 26.5 GHz requires option Ramp;S®ZNA-B8 in addition (Hardware option)ZNA43-B34 (1332.4717.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B16 (1332.4581.44) • Direct source and receiver access for Ramp;S®ZNA43 (4 ports) Installation ex factory only (Hardware option)ZNA43-B24 (1332.4646.24) • Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B44 (1332.4781.44) • Internal pulse modulator for port 3 for Ramp;S®ZNA43 (Hardware option)ZNA43-B3 (1332.4617.02) • 3rd and 4th internal source for Ramp;S®ZNA43 (4 ports) (Hardware option)ZNA43-B42 (1332.4781.42) • Internal pulse modulator for port 2 for Ramp;S®ZNA43 (Hardware option)ZNA43-B23 (1332.4646.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B163 (1332.4830.53) • Direct source monitor access on port 1 and port 3 before the source step attenuator for Ramp;S®ZNA43 (4 ports) requires Ramp;S®ZNA43-B16/-B21/-B23 Upgrade / retrofit by Ramp;S service Memmingen only. (Hardware option)ZNA43-B213 (1332.4869.13) • Internal combiner, port 1ZNA43-B33 (1332.4717.33) • Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B302 (1332.4769.22) • Low noise pre-amplifier at receiver port 2, up to 43.5 GHz for Ramp;S®ZNA43. (requires Ramp;S®ZNA43-B16, Ramp;S®ZNA43-B32)ZNA43-B41 (1332.4781.41) • Internal pulse modulator for port 1 for Ramp;S®ZNA43 (Hardware option)ZNA43-B32 (1332.4717.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)