Rohde amp; Schwarz ZNA43 (1332.4500.44)

3438 Visitors viewed Electro Rent (Europe) ads in the last 30 Days

Condition: Used
Vector Network Analyzer, 4 ports 10 MHz to 43.5 GHz, 2.92 mm (m) connectors; Direct source monitor a
ZNA-K4 (1332.5342.02) • Scalar mixer measurements and arbitrary frequency-converting measurements for Ramp;S®ZNA (software license)ZNA43-B31 (1332.4717.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B23 (1332.4646.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B43 (1332.4781.43) • Internal pulse modulator for port 3 for Ramp;S®ZNA43 (Hardware option)ZNA43-B41 (1332.4781.41) • Internal pulse modulator for port 1 for Ramp;S®ZNA43 (Hardware option)ZNA-K17 (1332.5459.02) • Increased IF bandwidth up to 30 MHz for Ramp;S®ZNA (software license)•••ZNA-K7 (1332.5371.02) • Measurements on pulsed signals (Pulse configuration, pulse profile and pulse train measurements) for Ramp;S®ZNA requires Ramp;S®ZNA-K17 (software license)ZNA43-B32 (1332.4717.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA43-B213 (1332.4869.13) • Internal combiner, port 1ZNA43-B3 (1332.4617.02) • 3rd and 4th internal source for Ramp;S®ZNA43 (4 ports) (Hardware option)ZNA-B19 (1332.4600.03) • Additional SSDZNA-K30 (1332.5465.02) • Noise figure on 2-portZNA43-B161 (1332.4830.51) • Direct source monitor accZNA43-B501 (1332.5236.11) • Spur magnitude reduction for enhanced spectral purity with low RF output power, for Port 1. (Required: Ramp;S®ZNA43-B31, recommended: Ramp;S®ZNA43-B16, Ramp;S®ZNA43-B161, Ramp;S®ZNA43-B21)ZNA43-B21 (1332.4646.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for Ramp;S®ZNA43 Installation ex factory only (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for Ramp;S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for Ramp;S®ZNA (4 ports) external access up to 26.5 GHz requires option Ramp;S®ZNA-B8 in addition (Hardware option)ZNA43-B302 (1332.4769.22) • Low noise pre-amplifier at receiver port 2, up to 43.5 GHz for Ramp;S®ZNA43. (requires Ramp;S®ZNA43-B16, Ramp;S®ZNA43-B32)