Used Agilent 8714ES-100 for sale by Test Equipment Connection Corp. | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Analyzers Network Misc. Network Analyzers Agilent 8714ES-100

Agilent 8714ES-100

212 Visitors viewed Test Equipment Connection Corp. ads in the last 30 Days

Send Request
  • Ask for price

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent 8714ES-100

Categories: Analyzers Network, Misc. Network Analyzers

Manufacturer: Keysight Technologies (Agilent HP)

Model: 8714ES

Condition: Used

Seller: Test Equipment Connection Corp.

Keysight (formerly Agilent) 8714ES-100 RF Network Analyzer (S-parameter), 300 kHz to 3

RF Network Analyzer (S-parameter), 300 kHz to 3 GHzThe Agilent 8714ES features an S-parameter test set with full two-port vector-error correction, providing complete and accurate measurements of device S-parameters. Two independent channels can measure and display two parameters such as S21 (transmission) and S11 (reflection) in a variety of formats including delay and SWR, on retangular, polar or Smith-chart displays. The Agilent 8714ES has a frequency range of 300 kHz to 3 GHz.The ES models contain a 60-dB source attenuator as a standard feature, giving 70-dB of power-level control for testing active and passive devices. Both 50-ohm and 75-ohm versions are available.Specifications Narrowband and broadband detection 100 dB dynamic range Real-time sweep speeds (40 ms/sweep) Integrated S-parameter test set Synthesized source with 1-Hz resolution Standard LAN interface Standard Internal Agilent Instrument BASIC (IBASIC) Standard 2, 6, and 12-port switching test sets availableOption 100: Fault location and structural return loss
Refurbished

Product specifications of Agilent 8714ES-100 (From Used-Line T&M Specifications)

  • Launch Date Jan-2049
  • Alternative E5062A ENA-L RF Network Analyzer
  • Instrument Type Vector, S-Parameter
  • Low end frequency limit 300 kHz
  • High End Frequency Limit 3 GHz
  • Status Discontinued by Manufacturer

The Agilent 8714ES features an S-parameter test set with full two-port vector-error correction, providing complete and accurate measurements of device S-parameters. Two independent channels can measure and display two parameters such as S21 (transmission) and S11 (reflection) in a variety of formats including delay and SWR, on rectangular, polar or Smith-chart displays. The Agilent 8714ES has a frequency range of 300 kHz to 1.3 GHz.

The ES models contain a 60-dB source attenuator as a standard feature, giving 70-dB of power-level control for testing active and passive devices. Both 50-ohm and 75-ohm versions are available.

Agilent Technologies RF economy network analyzers deliver the best combination of speed, accuracy, productivity features, and low cost. These analyzers help reduce tune and test times, increase throughput, and lower your overall cost per component. They offer all the critical performance and features needed to test typical RF components such as: • Filters • Amplifiers • Antennas • Cables • Mixers • CATV taps and distribution amplifiers

The 1.3 GHz 8712ET and ES models and the 3 GHz 8714ET and ES models are available in both 50-ohm and 75-ohm versions. With the addition of S-parameter measurement capability, the Agilent RF economy network analyzer family has evolved to meet today’s test demands of higher-performance components. This capability brings new levels of accuracy, convenience, and affordability for testing RF components.

S-parameter network analyzers let you measure the forward and reverse characteristics of your components without having to disconnect, turn around, and reconnect them to the analyzer. They also provide full two-port calibration to give you the best measurement accuracy possible. Depending upon your application, you can choose the optimum performance level of an S-parameter analyzer (ES models) or the lower cost of a transmission/reflection analyzer (ET models).

All models are loaded with powerful features including:

  • Synthesized source
  • High-dynamic-range narrowband and broadband receivers
  • Advanced vector-error correction 
  • Large display
  • Internal disk drive
  • Instrument BASIC (IBASIC) 
  • LAN capability

With both frequency and power sweeps, Agilent RF economy network analyzers let you quickly and accurately characterize the linear and nonlinear performance of your RF components.

Measurement capabilities:

  • Gain/Insertion loss
  • Isolation 
  • Insertion phase
  • Electrical length 
  • Linear group delay 
  • Return loss 
  • SWR
  • Reflection coefficient
  • Impedance
  • Gain compression 
  • AM-to-PM conversion
  • Absolute power
  • S-parameters (ES models only)

View Similar Listings
Hide Similar Listings

About Test Equipment Connection Corp.

Logo of Test Equipment Connection Corp.
Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later