PNA-X Microwave Network Analyzer 10MHz-26.5GHz,
Opt.:
200 = 2 ports, single source;
080 = Freq. offset measurement;
083 = Vector / scalar calibrated converter measurements;
084 = Embedded LO measure
219 = Add extended power range and bias-ees to 2 port analyzer
World´s widest range of single-connection measurement applications
The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
(This unit has 26,5 GHz).
Replace racks and stacks:
Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X.
Applications:
S-parameters (CW and pulsed)
Noise figure
Gain compression
Intermodulation and harmonic distortion
Conversion gain/loss
True-differential stimulus
Millimeter-wave
Nonlinear waveform and X-parameter characterization
Antenna test
Bandwidth: 10 MHz - 26,5 GHz
2- or 4-ports with two built-in sources (This unit has 2 ports.)
132 dB system and 130 dB receiver dynamic range, 32,001 points, 32 channels,
5 MHz IF bandwidth
High output power (+18 dBm), low harmonics (-60 dBc) and a wide power sweep range (38 dB)
Best dynamic accuracy: 0.1 dB compression with +13 dBm input power at the receiver
Low noise floor of -114 dBm at 10 Hz IFBW
€ 69,000 (net) $86,940 (US)