Used Rohde & Schwarz ZNB8 for sale by Huatien Technology Co., Ltd. | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Analyzers Network Vector Network Analyzers Rohde & Schwarz ZNB8

Rohde & Schwarz ZNB8

Send Request
  • $15800

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Rohde & Schwarz ZNB8

Categories: Analyzers Network, Vector Network Analyzers

Manufacturer: Rohde & Schwarz

Model: ZNB8

Condition: Used

Vector Network Analyzer 9kHz to 8.5gHz

DESCRIPTION OF ROHDE SCHWARZ ZNB8

Rohde & Schwarz - ZNB8-B10/B14 Vector Network Analyzer 9kHz-8.5GHz 
 

 

Vector Network Analyzer 9kHz-8.5GHz, 2 Por

The R&S ZNB8 is a Vector Network Analyzer designed to meet the highest standards and offers convenient characterization of active and passive RF components to make network analysis easy.

Wide dynamic range of up to 140 dB

Short sweep times of 4 ms for 401 points

High temperatur stability of typ. 0.01 dB/°C

Wide power sweep range pf 98 dB

Wide range of IF bandwidths from 1 Hz to 10 MHz

Manual and automatic calibration

Large, high-resolution 12.1" screen

Touchscreen user interface

Two or four test ports (this unit has 2 ports)

 

There are 2 units in stock.

Product specifications of Rohde & Schwarz ZNB8 (From Used-Line T&M Specifications)

  • Launch Date May-2011
  • Instrument Type Vector, S-Parameter
  • Low end frequency limit 9 kHz
  • High End Frequency Limit 8.5 GHz
  • Output Power Range -55 dBm to +13 dBm (+15 dBm typical), at 100 MHz to 2.5 GHz, no option; range of >95 dB with option
  • Input Noise Level <-115 dBm at 9 kHz to 50 kHz, <-130 dBm at 50 MHz to 4 GHz, <-120 dBm at 6.5 to 8.5 GHz
  • See also ZNB4
  • Status --

Rohde & Schwarz once again sets new benchmarks – with the R&S®ZNB vector network analyzers. The new family of network analyzers features high measurement speed, outstanding precision and exceptional ease of operation.

The R&S®ZNB vector network analyzers feature a wide dynamic range of up to 140 dB (at 10 Hz IF bandwidth), low trace noise of less than 0.004 dB RMS (at 10 kHz IF bandwidth) and high output power of up to +13 dBm, which can be adjusted electronically in a range of more than 95 dB.

With frequency ranges of 9 kHz to 4.5 GHz and 9 kHz to 8.5 GHz, the new network analyzers are primarily targeted at applications in the mobile radio and electronic goods industries. The R&S®ZNB is the right choice when it comes to developing, producing and servicing RF components such as amplifiers, mixers, filters and cables.

The new analyzers combine high measurement accuracy with exceptional speed – better than 10 μs per point. They feature excellent temperature and long-term stability, which ensures reliable measurements over several days without having to recalibrate the units.

These short-depth, compact two-port and four-port analyzers leave plenty of space on the workbench for the measurement application. They feature low operating noise thanks to low power consumption and a sophisticated cooling concept. The low power consumption also reduces operating costs and protects the environment.

  • Wide dynamic range of up to 140 dB, from 9 kHz for fast measurements on high-blocking DUTs 
  • Short sweep times of 4 ms for 401 points
  • Excellent raw data for high basic accuracy
  • High temperature stability of typically 0.01 dB/°C
  • Fast embedding/de-embedding for impedance matching using virtual networks
  • Mixed-mode S-parameters for balanced DUT characterization
  • Extensive analysis functions for convenient trace analysis
  • Amplifier measurements with wide power sweep range and receiver step attenuators
  • Time-domain analysis for distance-to-fault (DTF) measurements and filter adjustment
  • Wide range of IF bandwidths from 1 Hz to 10 MHz
  • Manual and automatic calibration
  • Large, high-resolution 12.1" screen
  • Flat and clear menu structures for efficient operation
  • Touchscreen user interface
  • Two or four test ports

Specifications for the R&S®ZNB8:

  • Frequency range: 9 kHz to 8.5 GHz
  • Frequency resolution: 1 Hz
  • Number of test ports: 2
  • Test port connector: N female
  • Impedance: 50 Ω
  • Number of measurement points per trace: 2 to 100001
  • Measurement bandwidth
    • Without optional increased bandwidth: 1 Hz to 1 MHz
    • With optional increased bandwidth: 1 Hz to 10 MHz
  • Dynamic range (without optional step attenuators)
    • 9 kHz to 100 kHz: >100 dB, typically 122 dB
    • 100 kHz to 50 MHz: >120 dB, typically 138 dB
    • 50 MHz to 4 GHz: >130 dB, typically 140 dB
    • 4 GHz to 7 GHz: >125 dB, typically 138 dB
    • 7 GHz to 8.5 GHz: >120 dB, typically 130 dB
  • Measurement time for 201 measurement points, with 200 MHz span, 500 kHz measurement bandwith
    • With 900 MHz center frequency: <5 ms
    • With 5.1 GHz center frequency: <4 ms 
  • Measurement time per point with 500 kHz measurement bandwidth, CW mode: 2.5 μs
  • Sample time per point
    • At 1 MHz measurement bandwidth: 860 ns
    • At 10 MHz measurement bandwidth: 312 ns
  • Switching time between channels with no more than 2001 points: <5 ms
  • Switching time between two preloaded instrument settings with no more than 2001 points: <5 ms
  • Test port output power range (without R&S®ZNB-B22 extended power range option)
    • 9 kHz to 100 MHz: –55 dBm to +10 dBm, typically +12 dBm
    • 100 MHz to 2.5 GHz: –55 dBm to +13 dBm, typically +15 dBm
    • 2.5 GHz to 7.5 GHz: –55 dBm to +10 dBm, typically +13 dBm
    • 7.5 GHz to 8.5 GHz: –55 dBm to +8 dBm, typically +12 dBm
  • Test port output power range (with R&S®ZNB-B22 extended power range option)
    • 9 kHz to 100 MHz: –85 dBm to +10 dBm, typically +12 dBm
    • 100 MHz to 2.5 GHz: –85 dBm to +13 dBm, typically +15 dBm
    • 2.5 GHz to 7.5 GHz: –85 dBm to +10 dBm, typically +13 dBm
    • 7.5 GHz to 8.5 GHz: –85 dBm to +8 dBm, typically +12 dBm
  • Test port input match without system error correction
    • 9 kHz to 20 kHz: >10 dB
    • 20 kHz to 8.5 GHz: >20 dB
  • Test port maximum nominal input level: +13 dBm
  • Test port damage level: +27 dBm
  • Test port damage DC voltage: 30 V 
  • Test port input noise level at 1 kHz measurement bandwidth, normalized to 1 Hz
    • 9 kHz to 50 kHz: <–115 dBm
    • 50 kHz to 50 MHz: <–120 dBm
    • 50 MHz to 4 GHz: <–130 dBm
    • 4 GHz to 6.5 GHz: <–125 dBm
    • 6.5 GHz to 8.5 GHz: <–120 dBm

View Similar Listings
Hide Similar Listings

About Huatien Technology Co., Ltd.

Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later