Vector Network Analyzer 300kHz - 8GHz, 2-Port Version, Test Ports N (f),
R&S ID 1145.1010K08,
no options
The R&S ZVB8 is a medium-class Vector Network Analyzer featuring outstanding performance with 2 or 4 ports and a bandwidth from 300 kHz to 8 GHz.
(This unit has 2 ports)
Bandwidth: 300 kHz to 8 GHz
Number of ports: 2
Test ports: N (f)
Overrange up to 150 kHz (unspecified and without calibration ex factory)
Impedance: 50 ohm
Static frequency accuracy:
Without optional oven quartz: 8x10e-6
With optional oven quartz: 1x10e-7
Frequency resolution: 1 Hz
Number of measurement points per trace: 2 to 20001
IF Measurement bandwidth: 1/2/5 steps 1 Hz to 500 MHz
Dynamic range (without optional step attenuator):
300 kHz - 5 MHz: > 80 dB, typ. 100 dB
5 MHz - 100 MHz: > 100 dB, typ. 120 dB
100 MHz - 4 GHz: > 120 dB, typ. 130 dB
4 GHz - 7 GHz: > 117 dB, typ. 127 dB
7 GHz - 7.5 GHz: > 115 dB, typ. 120 dB
7.5 GHz - 8 GHz: > 108 dB, typ. 118 dB
Measurement time (for 201 measurement points , with span 100 MHz, 500 kHz measurement bandwidth, ALC and display switched off):
With center frequency 1.1 GHz: < 6 ms
With center frequency 5.1 GHz: < 4.5 ms
Short measurement time/point (500 kHz measure. bandwidth CW mode): < 4.5 μs
High output power: + 13 dBm
High sweep power range: > 50 dB
Balanced measurements
Parallel measurements
Innovative user interface
Convenient and flexible analysis functions
Internal step attenuators available as options
One internal source
LXI Class C conformant
Options:
ZVAB-K2 = Time domain transform:
Display of discontinuities, reflection factor or impedance versus delay/length, step and impulse response, lowpass/bandpass frequency spacing, gated
S-parameters
ZVB-K3 = Mixer and harmonic measurements:
Conversion loss of mixers versus frequency or power
Can be used when one of the RF, IF or LO system frequencies is constant
Magnitude of harmonics of any order versus frequency or power
€ 15,000 (net) $18,900 (US)