Condition: Good
The Agilent 1000B Series oscilloscopes deliver the performance and features you expect in a big scope – and the portability and low price you require in a small one. We have enhanced the economy scope by giving you powerful signal capture and display, advanced measurement capabilities and accelerated productivity.
Up to 1 GSa/s sample rate Up to 16 kpts memory 5.7-inch color LCD display with wide viewing angle Simultaneous viewing of main and zoomed waveforms 23 automatic measurements Waveform math including FFT Advanced features including: sequential acquisition of up to 1000 trigger events, go/no go mask testing, and selectable digital filters Built-in help menus Front panel overlay, GUI and manual available in 11 languages Free education student lab guide and professor slide set USB connectivity
DSO1072B performance characteristics:
Bandwidth (-3dB): DC to 70 MHz Real-time sample rate: 1 GSa/sec half channel interleaved, 500 MSa/sec all channels Memory depth: 16 kpts half channel interleaved, 8 kpts all channels Number of channels: 2 Vertical resolution: 8 bits Vertical sensitivity (range): 2 mV/div to 10 V/div Vertical zoom: Vertical expand Maximum input voltage: CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk Dynamic range: +6 divisions from center screen Time-base range: 5 nsec/div to 50 sec/div Selectable BW limit: 20 MHz Horizontal modes: Main (Y-T), XY, delayed zoom and roll Input coupling: DC, AC and ground Input impedance: 1 MΩ ±2% in parallel with 15 pF ± 3 pF Acquisition modes
Normal: Displays sampled data directly to the screen in real time Averaging: Selectable from 2, 4, 8,16, 32, 64, 128 or 256 Sequence: Selectable 1 to 1,000 acquisition frames can be recorded, played back and stored in the scope memory or external USB memory Peak detect: Captures high-frequency glitches as narrow as 20 nsec when viewing signals at slow sweep speeds Roll: Waveform display rolls from right to left. Minimum horizontal scale setting is 50 msec/div
Interpolation: Sin (x)/x Trigger coupling: AC, DC, LF reject, HF reject Trigger modes
Force: Triggers immediately when front panel button is pressed Edge: Triggers on the positive and/or negative slope on any channel Video: Triggers on NTSC, PAL or SECAM video signals Pulse width: Triggers on pulse width greater than, equal to or less than a specific time limit, ranging from 50 ns to 10 sec Alternate: Triggers on two non-synchronized active channels
Trigger source: Ch 1, 2, Ext, AC Line (edge only) Cursor measurement: Manual, track waveform or automatic measurement selections. Manual and track waveform selections provide readout of Horizontal (X, ?X) and Vertical (Y, ?Y) Auto measurement
Voltage: Maximum, minimum, peak-to-peak, top, base, amplitude, average, RMS, overshoot, preshoot Time: Period, frequency, rise time, fall time, + width, - width, +duty cycle, -duty cycle, delay A-->B (rising edge), delay A-->B (falling edge), phase A-->B (rising edge) and phase A-->B (falling edge) Counter: Integrated 6-digit frequency counter on any channel. Counts up to the bandwidth of the scope
Display all measurements: Mode to display all single-channel automatic measurements simultaneously on the display Math functions: A+B, A-B, AxB, FFT. Source channel selection for A and B can be any combination of oscilloscope channels 1 and 2 AutoScale: Finds and displays all active channels, sets edge trigger modes on highest numbered channels, sets vertical sensitivity on channels, time base to display ~2 periods. Requires minimum voltage >20 mVpp, 1% duty cycle and minimum frequency >50 Hz Display: 5.7 inch diagonal color QVGA TFT LCD display with 300 cd/m2 backlight intensity
Display persistence: OFF, Infinite Display types: Dots, Vectors
Waveform update rate: 200 wfm/sec Save/Recall internal: 10 setups and 10 waveforms can be saved and recalled using internal non-volatile memory locations. 1 reference waveform can be saved and recalled using an internal volatile memory location for visual comparisons Save/Recall external
Setups: STP saved and recalled (Note: setups not transferable between A and B models) Waveforms: WFM saved and recalled, CSV saved Reference waveforms: REF saved and recalled for visual comparisons Images: 8-bit BMP, 24-bit BMP, PNG saved
I/O
Standard ports: USB 2.0-compliant host port on front panel; USB 2.0 device port for PictBridge compatible printing Max transfer rate: USB 2.0 full-speed up to 12 Mb/sec USB flash drive compatibility: Most FAT formatted <2 GB or FAT32 formatted <32 GB flash drives Printer compatibility: PictBridge-compliant printers via USB device port
In stock