The WaveRunner 6 Zi defines superiority in a test instrument with a powerful feature set including a wide range of application packages, advanced triggering to isolate events, a user interface developed for quick and easy navigation, a wide range of probing options, and lightning-fast performance.
WaveRunner 6 Zi offers the most tools for serial data analysis. With over 17 trigger, decode, and compliance solutions, WaveRunner 6 Zi can address problems with unique, powerful views and automated tools. The unique measurement toolset, ProtoSync, combines the oscilloscope view with a simultaneous view of data link layer decodes on the same instrument.
The WaveRunner 6 Zi oscilloscope family features a pristine signal path that offers unmatched signal fidelity with low noise. This performance is augmented by a huge offset and timebase delay adjustment to allow easy signal and amplifier performance assessment and zooming on vertical and horizontal signal characteristics.
Designed for the medical, automotive, power, and electro-mechanical markets, the WaveRunner HRO has higher resolution and measurement precision compared to 8-bit alternatives. Traditional oscilloscopes use 8-bit ADCs to digitize the data, which is not enough for many applications that require viewing signals with both a large and small voltage component. The reduced noise and improved resolution of the 12-bit ADC architecture provides improved measurement accuracy and better waveform clarity.
The WavePilot control area provides convenient control of Cursors, Decode, WaveScan, History, LabNotebook, and Spectrum by their respective function buttons on the front panel.
The SuperKnob is a joystick-like knob in the center of the WavePilot control area used to easily navigate through tables, zoom and position waveforms, and quickly document and annotate your setups.
Simply slide the button on the left side of the display and rotate upwards 90º. The display will automatically change from landscape to portrait mode. The display will also pivot upwards and downwards to optimize viewing angle.
A powerful combination of high bandwidth edge and 10 different SMART triggers, four stage cascade triggering, measurement trigger, and triggerscan are all standard and allow you to isolate the problem quickly and begin focus on the cause. The measurement trigger offers a powerful option to qualify a trigger event based on a qualified measurement with great resolution. A high-speed serial trigger enables triggering on up to 3 Gb/s serial patterns of up to 80-bits in length. A full range of serial triggers (I2C, SPI, UART, RS-232, Audio (I2S, LJ, RJ, TDM), CAN, LIN, FlexRay, MIL-STD-1553, SATA, PCIe, 8b/10b, USB2 and many others) are also available.
The 12.1" high resolution WXGA wide screen is designed to provide the best view of any signal type on the display.
The widescreen is ideal for a variety of signals where long records are required and zooming or scrolling results in a large block of data.
Rotate the screen 90° degrees to optimize the display for viewing digital signals, jitter tracks, eye diagrams, and frequency plots. The screen image will adjust automatically when rotated. Tilt the display up or down in either orientation to minimize reflections or glare.
- Industry leading performance—400 MHz—4 GHz, 40 GS/s, 128 Mpts of analysis memory
- 12.1" Widescreen (16 x 9) high resolution WXGA color touch screen display
- 90º rotating and tilting display for optimal viewing of signals
- Small footprint, only 8.1" deep
- Easy connectivity with two convenient USB ports on the front, two on the side
- USBTMC (Test and Measurement Class) port simplifies programming
- X-Stream™ II streaming architecture for faster analysis and excellent responsiveness
- Deepest toolbox with more measurement, more math, more power
- Largest selection of serial triggers and decoders—more than 17—available to provide a total system view
- Serial trigger captures signals up to 3 Gb/s
- WavePilot consolidates important oscilloscope debug features in one place. LEDs illuminate to indicate navigation options and active oscilloscope features
- The SuperKnob provides joystick control to easily navigate to key debug and documentation features
- LBus provides easy connection to the optional mixed signal feature, providing up to 36 digital channels
- Wide array of probes and accessories to accommodate any probing challenge
WaveRunner HRO 6 Zi Analysis Tools:
- Spectrum Analysis
- 16 Multiple grids
- Pass Fail Testing
- Power Analysis
- SDA II Serial Data Analysis
- JitKit Clock Jitter Analysis
- History Mode
- Measurement Trigger
- All Instance Measurements
- WaveScan
- Full Customization with XDEV
- TriggerScan – Rare event Capture
Specifications for WaveRunner HRO 66Zi:
- Vertical
- Analog Bandwidth at 50 Ω: 600 MHz; Analog Bandwidth at 1 MΩ: 500 MHz (typical)
- Rise Time (10–90%): 625 ps (typical)
- Rise Time (20–80%): 435 ps (typical)
- Input Channels: 4
- Bandwidth Limiters: 20 MHz, 100 MHz, 200 MHz, 350 MHz
- Input Impedance: 50 Ω±2% or 1 MΩ || 17pF, 10 MΩ || 17 pF with supplied Probe
- Maximum Input Voltage: 50 Ω: 5 Vrms ± 10 V peak, 1 MΩ: 400 Vmax (DC + peak AC < 10 kHz)
- Channel-Channel Isolation: >100:1 up to rated BW
- Vertical Resolution: 12 bits; up to 15 bits with enhanced resolution (ERES)
- Horizontal
- Timebases: Internal timebase common to 4 input channels; an external clock may be applied at the auxiliary input
- Time/Division Range: Real-Time: 20 ps/div-1600 s/div; RIS mode: 20 ps/div - 10 ns/div; Roll mode: up to 1600 s/div
- Trigger and Interpolator Jitter: ≤5.5 psrms (typical), <0.1 psrms (typical, software assisted)
- External Clock: DC to 100 MHz; (50 Ω/1 MΩ), EXT BNC input, Minimum rise time and amplitude requirements apply at low frequencies
- Acquisition
- Single-Shot Sample Rate/Ch: 2 GS/s on 4 Ch
- Memory Options (4 Ch / 2 Ch / 1Ch): L-128 Option: 128M / 128M / 128M; XL - 256 Option: 256M / 256M / 256M
- Standard Memory (4 Ch / 2 Ch / 1Ch) (Number of Segments): 64M / 64 M / 64M (30,000)
- Enhanced Resolution (ERES): From 12.5 to 15 bits vertical resolution
- Maximum Trigger Frequency, SMART Trigger: 600 MHz @ ≥ 10 mV/div (minimum triggerable width 1.2 ns)
- LeCroy WaveStream™ Fast Viewing Mode Maximum Sampling Rate: 2 GS
- Auxiliary Input Maximum Input Voltage: 50 Ω: 5 Vrms; 1 MΩ: 400 Vmax (DC + Peak AC ≤ 5 kHz)