National Instruments PXIe-5105 PXI Oscilloscope
The National Instruments PXIe-5105 (Part Numbers: 783590-01, 783590-02, 783590-03) High-Resolution Digitizer highlights eight 60 MS/s simultaneously tested voltage input channels with 12-bit resolution, 60 MHz bandwidth capacity, and up to 512 MB of memory in a smaller, 3U PXI/PXI Express, or PCI gadget. The NI PXIe-5105 uses the National Instruments Synchronization and Memory Core (SMC) engineering, so the user can join numerous gadgets to develop 136 phase-coherent channels in a single NI PXI chassis. The user can also synchronize the PXIe 5105 with other analog and digital instruments to make mixed signal test frameworks.
The NI PXIe 5105 Digitizer is perfect for an extensive variety of uses, including: ultrasonic nondestructive test (NDT), medical imaging, scientific research, military/aviation, and consumer electronics.
The NI device is run using the NI-SCOPE driver software, which is compatible with software packages/application development environments (ADEs) such as LabVIEW, LabWindows/CVI, Measurement Studio, Microsoft Visual C/C++, and .NET (C# and VB.NET). The device hardware can be configured using the Measurement & Automation Explorer (MAX) tool. It has a recommended warm-up time of 15 minutes and should be calibrated at least once every two years.
For time and frequency analysis, this Oscilloscope offers:
• 60 MHz input transmission capacity with anti-alias and noise filters
• 72 dBc spurious free dynamic range (SFDR), Eight 60 MS per second, and 12-Bit Input Channels
• Independent channel-selectable 50 mVpp to 30 Vpp input
• Independent channel-selectable 50 Ω or 1 Mω input impedance
• 2-year alignment interim and 0 to 55 ° C working temperature and a deep onboard memory
• 16, 128, or 512 MB of locally available memory
• Capture in excess of 1 million triggered waveforms in various record mode, with equipment trigger rearming
• Stream information persistently from installed memory to host memory or disk.
The NI device has a recommended operating temperature range of 0 °C to 55 °C, and a storage temperature range of -40 °C to 71 °C. It weighs 18.3 oz, and measures 8.43 x 0.8 x 5.1 in. in physical dimensions. The PXIe-5105 is equipped with 2 SMB jack front connectors, has a total power requirement of 23 W.
| Model | PXIe-5105 |
|---|
| Part Numbers | 783590-01, 783590-02, 783590-03 |
| Manufacturer | National Instruments |
| Type | PXI Oscilloscope |
| Maximum Bandwidth | 60 MHz |
| Voltage Input Channels | 8 |
| Maximum Sample Rate | 60 MS/s |
| Dimensions | 8.43 x 0.8 x 5.1 in. |
| Weight | 18.3 oz. |
| Warranty | Three Year Warranty |
| PXIe-5105 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for PXIe-5105:
156861A-01L, 156861-01L, 156861A-02L, 156861-02L, 156861A-03L, 156861-03L, 156861B-01L, 156861B-02L, 156861B-03L, 156861C-01L, 156861C-02L, 156861C-03L, 192206H-01L, 192206-01L, 195906C-04L, 195906-04L, 783590-01, 783590-02, 783590-03
UPS, FedEX and DHL – Free Ground on all orders
Overnight, Next Day Air or Expedited shipping options available
International delivery available
Same day shipping for in-stock on location
All of our products are covered by our Apex Waves Warranty.
✓ 3 Year Warranty - New Surplus Parts
✓ 2 Year Warranty - Refurb / Fully Tested Parts
No hassle return policy.
Dedicated customer service team.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
PXOE-5105, PXID-5105, PXIE-Y105, PXIE-51O5, PXIE-510R