Used Agilent HP 83522a for sale by SoCal Surplus | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Plug-ins RF Plug-ins Agilent HP 83522a

Agilent HP 83522a

Send Request
  • $1250

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent HP 83522a

Categories: Plug-ins, RF Plug-ins

Manufacturer: Keysight Technologies (Agilent HP)

Model: 83522A

Condition: Used

hp 83522a fr sweeper plug-in 10mhz-2.4ghz

Product specifications of Agilent HP 83522a (From Used-Line T&M Specifications)

  • Launch Date Jan-2049
  • Alternative E4428C ESG Analog Signal Generator
  • Status Discontinued by Manufacturer

The 83522A is an RF plug-in for the 8350A/B sweep oscillator. The 83522A covers the frequency range of 0.01 to 2.4 GHz. A YIG oscillator is used as the tunable RF frequency source, and a fixed 3.8 GHz oscillator is mixed with the YIG oscillator to generate a 0.01 to 2.4 GHz RF output.

The 83522A front panel functional controls, pushbuttons, and the Rotary Pulse Generator (RPG) are monitored by the 8350A via the RF plug-in interface circuits. The 8350A generates a tuning voltage ramp according to the mode of operation. This voltage ramp is scaled and offset by the 83522A to provide a voltage ramp that is proportional to the YIG oscillator frequency in the 83522A. The 83522A then converts the tuning ramp voltage to a current, which drives the YIG oscillator tuning coil.

The 83522A offers a maximum leveled RF output power of +13 dBm. Internal (INT), External (EXT), and Power Meter (MTR) leveling is available as selected by the front panel pushbuttons. A front panel EXT/MTR ALC input connector and gain control (CAL) are provided to use with an external leveling loop. A front panel LED indicates when the RF output becomes unleveled. The RF output level is controlled by the 83522A RPG, the 8350A data entry controls (keypad and step keys), or through HP-IB control via the 8350A.

  • Frequency range: 0.01 to 2.4 GHz
  • Maximum leveled output power: +13 dBm
  • Calibrated power output range: 15 dB; with Option 002, 85 dB
  • Residual AM in 100 kHz bandwidth (in dB below carrier and at specified maximum leveled power): ≥50 dB
  • Spurious signals at specified maximum leveled power
    • Harmonics in dB below carrier: ≥25 dB
    • Non-Harmonics in dB below carrier: ≥30 dB at 0.01 to 2.1 GHz; ≥25 dB at 2.1 to 2.4 GHz
  • Output VSWR: <1.5
  • Power sweep calibrated range: ≥15 dB 
  • External AM modulation: Maximum input: 15 V
  • Internal AM modulation: Selectable by internal jumper in 8350A to 1 kHz or 27.8 kHz square wave modulation, which allows operation with the 8755A/B/C swept amplitude analyzer. On/off ratio is ≥30 dB below specified maximum leveled power. Symmetry: 40/60
  • External FM modulation: Frequency response (DC to 2 MHz): ±3 dB
  • Internal crystal referenced frequency markers are available to provide Z-axis instensity markers from the 8350A rear panel POZ Z BLANK BNC output or 1 dB amplitiude marker dips on the RF output
  • Harmonic markers of 10 MHz and 50 MHz are available up to 2.4 GHz
  • Minimum sweep time over full band: 10 ms
  • The RF output can be turned off by the RF ON/OFF pushbutton 
  • RF output connector: Type N female

View Similar Listings
Hide Similar Listings

Listings similiar to Agilent HP 83522a

About SoCal Surplus

Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later