Used Agilent 6634A for sale by Rosenkranz Elektronik | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Power Supplies DC Sources Agilent 6634A

Agilent 6634A

105 Visitors viewed Rosenkranz Elektronik ads in the last 30 Days

Send Request
  • €475

Send to a Friend
Flag of GermanyEquipment Location: Germany      
View Description>
Hide Description

Description of Agilent 6634A

Categories: Power Supplies, DC Sources

Manufacturer: Keysight Technologies (Agilent HP)

Model: 6634A

Condition: Used

Seller: Rosenkranz Elektronik

Keysight (Agilent/HP) The 6634A Power Supply is a 100 watt, single output, series pass...

The 6634A Power Supply is a 100 watt, single output, series pass regulated supply
is rated 100 V @ ±1 A. Both the voltage and current output can be programmed
for either CV or CC operation. A built-in DCM and precision current shunt measure (readback)
the actual power supply output. The internal HP-IB interface allows
for complete programmability, including status reporting and interrupt generation
with user designated fault conditions.

Product specifications of Agilent 6634A (From Used-Line T&M Specifications)

  • Launch Date Jan-2049
  • Alternative 6634B 100 Watt System Power Supply, 100V, 1A
  • See also 6632A, 6633A
  • Status Discontinued by Manufacturer

The HP 6632A, 6633A, and 6634A power supplies feature a combination of programming capabilities and linear power supply performance that makes them ideal for power system applications. The models in this family offer 100 watts of output power.

The power supply is a single range unit with the capability of sinking as well as sourcing current. The output can be programmed both locally from the front panel and remotely over the HP-IB.

Output connections are made to the rear panel screw terminals. Either the positive or negative output terminal can be grounded, or the output can be floated up to +/-240 Vdc from the chassis ground. The output voltage can be sensed locally or remotely. When shipped, the supply is jumpered for local sensing.

The supply has no potentiometers and is calibrated over the HP-IB. Software calibration eliminates the need to remove the supply from your system cabinet.

  • DC output voltage range: 0 to 100 V
  • DC output voltage programming range: 0 to 102.38 V
  • DC output current range: -1 to +1 A
  • DC output current programming range: 0.004 to 1.0238 A
  • DC output OVP programming range: 0 to 110 V
  • Voltage programming resolution: 25 mV
  • Current programming resolution: 0.25 mA
  • OVP programming resolution: 500 mV
  • Voltage programming accuracy: 0.05%
  • Voltage PARD (ripple and noise): 0.5 mV
  • Current PARD: 2 mArms
  • Load transient response: 100 microS
  • Typical voltage readback resolution: 25 mV
  • Self-test at power on or from a command
  • Fast or normal mode operation selectable via rear-panel switch
  • Optional built-in relays and DFI/RI
  • Optional front panel binding posts

View Similar Listings
Hide Similar Listings

Listings similiar to Agilent 6634A

About Rosenkranz Elektronik

Logo of Rosenkranz Elektronik
Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later