National Instruments PXIe-4154 PXI Programmable Power Supply
The PXIe-4154 (Part Number: 781155-01, 195709C-01L) is a Programmable Power Supply for battery test systems. It is intended to recreate the transient behavior of a lithium-ion battery cell, output resistance, and 2-quadrant operation (source/sink). As it is essential in numerous RF and remote applications, the test system's fast transient response time enables it to react rapidly to changes in load current with minimal voltage drop, which makes the NI PXIe-4154 perfect for controlling devices under test (DUT), such as RF power amplifiers, phones, and an assortment of mobile devices. To make the behavior of a battery more precise, the user can utilize the programmable output resistance to simulate the internal resistance of the battery. For idle current and standby estimations, the PXIe-4154 has integrated current measurement.
The NI PXIe-4154 Programmable Power Supply highlights integrated current measurement with down to 1 μA sensitivity. This model also offers a supplemental 8 V, 1.5 A charger simulator channel for power management ICs, alongside the battery simulator channel. The two channels on the PXIe-4154 incorporate voltage and current read-back with up to 200 kS/s continuous acquisition rates, which is perfect for characterizing transient behavior. The user can also sequence and trigger outputs and measurements by means of the PXI backplane for synchronization with digital I/O and RF instrumentation.
This model offers a 6 V, 3 A, 2-quadrant battery simulator channel, an ultrafast transient response of <20 μs, 200 kS/s of continuous waveform acquisition of voltage and current, 1 μA of measurement sensitivity for standby currents, and an additional 8 V, 1.5 A charger simulator channel.
Apex Waves will continue to Buy, Sell, and Repair EOL NI Hardware in perpetuity. Request your quote today!
| PXIe-4154 Technical Specifications |
|---|
| Type | PXI Express Programmable Power Supply |
| Power Supply Channels | 2 (Battery Simulator and Charger Simulator) |
| Battery Simulator Output | 0 to 6 V, ±3 A (source), ±3.1 A (sink) |
| Charger Simulator Output | 0 to 8 V, ±1.5 A (source), ±0.1 A (sink) |
| Output Resistance (Ch. 0) | Programmable, -0.04 Ω to 1 Ω, 1 mΩ resolution |
| Voltage Resolution | Battery: 2.3 mV; Charger: 3 mV |
| Current Resolution | Battery: 1 mA (3 A range), 10 μA (30 mA range) |
| Voltage Measurement Resolution | Battery: 100 μV; Charger: 150 μV |
| Current Measurement Resolution | Battery: 1 μA (30 mA), 100 μA (3 A); Charger: 50 μA |
| Max Acquisition Rate | 200 kS/s continuous for voltage and current |
| Transient Response (Ch. 0) | <20 μs (fast mode), <40 μs (normal mode) recovery time |
| Voltage Ripple & Noise | <1 mV RMS (battery), <2 mV RMS (charger), typical |
| Remote Sense Capability | Up to 1 V drop per lead (≤6 V), derated above 6 V |
| Dimensions | 1.6 x 5.1 x 8.5 in. (3U, 2-slot PXIe module) |
| Weight | 19.9 oz (565 g) |
| Warranty | 1-year calibration interval (warranty may vary) |
Associated part numbers for PXIe-4154:
195709A-01L, 195709-01L, 195709B-01L, 781155-01, 195709C-01L, 19958BB-01L, 19958B-01L
UPS, FedEX and DHL – Free Ground on all orders
Overnight, Next Day Air or Expedited shipping options available
International delivery available
Same day shipping for in-stock on location
All of our products are covered by our Apex Waves Warranty.
✓ 3 Year Warranty - New Surplus Parts
✓ 2 Year Warranty - Refurb / Fully Tested Parts
No hassle return policy.
Dedicated customer service team.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
LXIE-4154, PZIE-4154, PAIE-4154, PXLE-4154, PXIR-4154