Agilent / HP 11792A 50 MHz to 26.5 GHz Sensor Module for the 8902A Measuring Receiver - CALIBRATED!
You are bidding on a Agilent / HP 11792A 50 MHz to 26.5 GHz Sensor Module for the 8902A Measuring Receiver. It will arrive with a fresh calibration performed by an ISO 17025 accredited lab. This auction is for the 11792A Sensor Module only. The 8902A Measuring Receiver is shown for reference only.
The Agilent 8902A measuring receiver delivers the accuracy and resolution of a high performance power meter at
frequencies from 150 kHz to 1.3 GHz (50 MHz to 26.5 GHz with the Agilent 11793A microwave converter) and levels from +30 dBm to -127 dBm. It accurately measures AM, FM and M, including residuals
and incidentals, with a single keystroke. The Agilent 8902A measuring receiver, with the Agilent 11793A, counts RF signals to 26.5 GHz with 10 Hz resolution and excellent long-term frequency
stability. The 8902A measuring receiver with Option 050 offers increased power measurement accuracy. This option specifies Tuned RF Level on the 8902A measuring receiver to an accuracy of ±(0.015
dB + 0.005 dB/10 dB step).
The Agilent 11792A Power Sensor Module gives you all the performance of the Agilent 8902S system, plus superb power-measurement accuracy, at a single connector. You can characterize a signal without manually switching between the power sensor and the receiver input.
11792A Sensor Module Features:
Frequency range - RF Power measurements: 50 MHz to 26.5 GHz
Power range: +30 dBm (1 watt) to –20 dBm (10 mW)
Input SWR (connected to an Agilent 11793A)
<1.15, 1300 MHz ≤fc
<1.40, 18.0 GHz <fc≤26.5 GHz
Power sensor linearity: +2%, –4%; +30 dBm to +20 dBm; negligible deviation, levels <+20 dBm
Input connector: 3.5 mm male
Input impedance: 50 Ω nominal
Switch life: >1,000,000 switchings
This unit is in excellent condition, has been fully tested and is guaranteed functional. It comes with a 30 day right of return should it not perform to your expectations. Please review pics and text carefully before bidding to verify accuracy of description. If you don't see it in the pictures, it is not included.
Insurance is included in UPS shipping charges. Item shipped internationally on buyer's UPS, FEDEX or DHL accounts only.
We will accept payment for this item by company check, cashier’s check and wire transfer only.
If you have zero feedback, contact us prior to purchase so we know you are a serious bidder. Otherwise, we may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed.
Please note that shipping and insurance costs are non-refundable.
Our feedback is very important to us and we strive for 100% positive on every transaction. If you are unsatisfied with any aspect of your transaction, please contact us before leaving negative or neutral feedback so that we can address and remedy the issue immediately. Additionally, we are always happy to leave positive feedback for our trading partners after a successful transaction.
Make sure that you check out our other auctions for more great deals on test and measurement equipment.
Thank you and good luck bidding