National Instruments DCM-2316

77 Visitors viewed Apex Waves, LLC ads in the last 30 Days

National Instruments DCM-2316 Direct Injector Control and Measurement Device   

The DCM-2316 is a multi-channel Direct Injector Control and Measurement Device developed by National Instruments. The DCM-2316 has the part number 784570-01. The NI DCM-2316 device possesses 16 channels, as well as engine position tracking in high-resolution and advanced triggering features for injector control. The DCM-2316 device is manufactured with accommodation for up to 8 piezoelectric or 16 solenoid direct injectors.

The NI DCM-2316 device normally operates at voltages up to 250 V. The user must take extreme care to protect the DCM-2316 against shock. The NI DCM-2316 Direct Injector Control and Measurement Device needs two minutes to dissipate high voltages after being completely powered off. The user must be informed about the safety protocols of the DCM-2316 device. It is prohibited to touch any of the connector pins or injector terminals while the NI DCM-2316 is powered ON. The user can control a complete fuel system with the National Instruments DCM-2316 device.

The National Instruments DCM-2316 Direct Injector Control and Measurement Device has advanced waveform generation and triggering features. The user can outline complicated current/voltage profiles with the NI DCM-2316. The 16 channels on this device can be used for accurate control of the fuel systems, along with delivering nanosecond-scale control with the LabVIEW reconfigurable I/O (RIO) architecture. The maximum power consumption for the DCM-2316 device is based on a system running a high-stress application. It is recommended not to connect the NI DCM-2316 to signals or use it for measurements in Measurement Categories II, III, or IV.