4-Channel Digital Phosphor Oscilloscope 3.5GHz for Serial/Digital Applications,
Options:
ASM = Advanced event search and mark;
DDRA = Upgrade to DDR technology analysis package;
DJA = Advanced jitter and eye analysis tools
The Tektronix DPO7354 is a real time Digital Phosphor Oscilloscope with a
3.5 GHz bandwidth and 4 channels designed for verifying, characterizing, debugging, and testing sophisticated electronic designs and its well suited
for serial and digital applications.
Bandwidth: 3.5 GHz
Input channels: 4
Rise time: 115 ps
Hardware analog bandwidth (-3 dB): 2.5 GHz
Input coupling: AC, DC, GND
Vertical resolution: 8 bit (>11 bit with high resolution)
Max. input voltage:
1 Mohm: +/- 150 V CAT I derate at 20 dB, decade to 9 V rms above 200 kHz
50 ohm: 5 V rms, with peaks less than +/- 24 V
Position range: +/- 5 divisions
Real time sample rate max:
40 GS/s per 1 ch, 20 GS/s per 2 ch, 10 GS/s per 3-4 ch
Max. Record length:
Standard: 50 M/ch / 25 M/2ch / 12.5 M/4ch
Optional up to 500 M/ch / 250 M/2ch / 125 M/4ch
Time base range: 25 ps/div to 1000 s/div
Time resolution (in ET/IT mode): 250 fs
Time base delay time range: 5 ns to 250 ns
Trigger jitter (rms):
1.5 ps rms typ. with enhanced triggering off
< 100 fs rms with enhanced triggering on
Time base accuracy: +/- 2.5 ppm + aging < 1ppm/ year
Acquisition modes (max. fast acquisition mode) waveform capture rate:
>250,000 wfms/s on all 4 channels simultaneously
Signal aquisition
Easy operation
Debugging tools
User selectable bandwidth limit filters
Event search and mark
Pinpoint triggering
12.1" XGA display with touch screen
Communication mask testing
Up to 500 megasample record length with MultiView Zoom, for quick navigation
64 bit NRZ serial pattern trigger for isolation of pattern-dependent effects up to 1.25 Gb/s
Technology-specific software, provides built-in domain expertise: MIPI, D-PHY, Ethernet, USB 2.0 compliance testing, jitter, timing, eye diagram, power , DDR memory bus, analysis, CAN, LIN, and FlexRay network design
Low speed serial protocol triggering and decode: I²C, SPI, RS-232, CAN, LAN, and FlexRay
Applications:
Signal integrity, jitter, and timing analysis
Verification, debugging, and characterizing of sophisticated designs
Debugging and compliance testing of serial data streams
Low speed serial bus design: I²C, SPI, RS-232, CAN, LIN, FlexRay
Power measurement and analysis
Spectral analysis
€ 24,211 (net) $30,506 (US)