Real Time Signal Analyzer 1Hz-6.2GHz
w/ options:
200 = Advanced Triggers and Swept DPX;
53 = Memory Extension, 4 GB Acquisition Memory Total;
56 = Removable SSD;
6566 = Digital I and Q outputs and Zero-span analog Output;
B16X = 165 MHz Acquisition Bandwidth;
PFR50 = Precision Frequency Reference and Internal Preamplifier;
10 = AM/FM/PM Modulation and Audio Measurements;
11 = Phase Noise / Jitter Measurement;
12 = Settling Time (Frequency and Phase);
20 = Pulse Measurements;
21 = General Purpose Modulation Analysis;
22 = Flexible OFDM Analysis;
23 = WLAN 802.11a/b/g/j/p measurement application;
24 = WLAN 802.11n measurement application;
25 = WLAN 802.11ac measurement application;
26 = APCO P25 measurement application;
27 = Bluetooth Basic LE Tx Measurements
Unit sold with a valid calibration certificate and with 12 months warranty
The RSA5106B is a Real Time Signal Analyzer with a frequency range from 1 Hz to
6.2 GHz and offers the functionality of a high performance spectrum analyzer, wideband vector signal analyzer, and the unique trigger-capture-analyze capability of a real-time spectrum analyzer- all in a single package.
Frequency range: 1 Hz to 6.2 GHz
Min. event duration for 100 % POI: 0.434 µs
Real-time bandwidth: 25 MHz, 40 MHz, 80 MHz, 125 MHz und 165 MHz
+17 dBm 3rd order intercept at 2 GHz
±0.3 dB absolute amplitude accuracy to 3 GHz
Displayed average noise level:
–142 dBm/Hz at 26.5 GHz, –157 dBm/Hz at 2 GHz and –150 dBm/Hz at 10 kHz
Internal preamplifier available:
DANL of -156 dBm/Hz at 26.5 GHz, -167 dBm/Hz at 2 GHz
Phase noise:
–113 dBc/Hz at 1 GHz and –134 dBc/Hz at 10 MHz carrier frequency, 10 kHz offset
High-speed sweeps with high resolution and low noise:
1 GHz sweeps at 10 kHz RBW in <1 s
Real time spurious free dynamic range of 80 dB with HD options
DPX Live RF spectrum display:
Discover the most difficult to find signal behavior. Improve test confidence and catch very short duration transients missed by conventional spectrum analyzers.
Triggering expertise:
Save time by isolating signal anomalies on which other instruments can't even trigger. Isolate hard to find hardware and software anomalies with cross domain triggering between multiple instruments.
Seamless data capture:
Observe the entire duration of signal events, like frequency hopping sequences, PLL settling times, turn on transients, and multiple pulses.
Multi-domain time correlation:
Accelerate troubleshooting and analysis by pinpointing the root cause of problems in multiple domains. Analyze captured data in any/all domains at any time with correlated markers.
Automatic pulse measurement and detection:
Simplify test and save test time with multiple measurements on the same captured data. Reduce cost of test with a versatile single instrument that replaces multiple test sets.
€ 59,000 (net) $74,340 (US)