Used Compliance West CW-HTT-1 for sale by Calright Instruments | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement T&M Miscellaneous Test Equipment Compliance West CW-HTT-1

Compliance West CW-HTT-1

Send Request
  • $255

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Compliance West CW-HTT-1

Categories: T&M, Miscellaneous Test Equipment

Manufacturer: Compliance West

Model: HTT-1

Condition: Used

Seller: Calright Instruments

Compliance West CW-HTT-1 The HTT-1 was designed to provide a fast, safe and reliable...

The HTT-1 was designed to provide a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Continuity Testers between calibration cycles. It allows the operator to check the result of the three failure modes encountered in production hipot and ground circuit testing (open ground, high leakage current, and dielectric breakdown) separately or in any combination to verify proper test equipment operation. A passing test can also be simulated. The test leads allows connection of the HTT-1 to any hipot tester using a standard NEMA 15A receptacle and banana plug return leads to connect to the EUT. The manual contains anticipated results and suggests testing procedures.

The maximum voltage the HTT-1 can test is 2000Vac/2800Vdc, which corresponds with the upper voltage limits of our production line testers, the HT-2000 and HT-2800. While the HTT-1 can be used effecively to verify the function of our HT-5000, HT-10kV and HT-20kV testers, care must be exercised to ensure the voltage output of these testers is below 2000Vac or 2800Vdc when they are being tested by the HTT-1.

Custom configurations for various pass/fail points are available*. Call for price and delivery.


Condition: Brand New
Ships within 1-2 days

Product specifications of Compliance West CW-HTT-1 (From Used-Line T&M Specifications)

  • Launch Date Jan-2049
  • Status --

Your hipot tester meter reads 1200 volts.  How do you know that the test voltage is getting to your product?  Have you plugged the product into the correct output?  Are your test cables still good?

The HTT-1 was designed to provide a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Continuity Testers between calibration cycles.
It allows the operator to check the result of the three failure modes encountered in production hipot and ground circuit testing (open ground, high leakage current, and dielectric breakdown) separately or in any combination to verify proper test equipment operation. A passing test can also be simulated.

  • The stock HTT-1 simulates the following failures: 
    • Ground Continuity Chassis to Ground (open)H
    • igh Leakage Line to Ground (short)
    • Dielectric Withstand Failure (Arc View window displays an arc at 750Vac ± 200V).
  • The HTT-1 can also be set to simulate passing tests:
    • Ground Continuity Chassis to Ground (short)
    • Normal Leakage Line to Ground (open)
    • Dielectric Withstand OK (up to 3000 volts)
  •  Works with any manufacturer'''s Dielectric Withstand or Ground Continuity Tester. The HTT-1 simulates the failures and your tester should return results consistent with the switch settings on the front panel of the HTT-1
  • The HTT-1 is a passive device. No batteries or power is required 
  • Verifies proper operation of your equipment in less than a minute
  • Portable
  • Light weight
  • Simple to operate
  • Saves time
  • Custom configurations available
  • 1 year warranty

View Similar Listings
Hide Similar Listings

About Calright Instruments

Logo of Calright Instruments
Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later