FieldFox Handheld Cable and Antenna Analyzer and Vector Network Analyzer,
2MHz-6GHz,
options:
106= 6GHz Cable and Antenna Analyzer;
111= QuickCal Calibration;
Acessories:
N9910X-800= 3-in-1 OSL T-Calibration Kit DC 6GHz, Type N(m), 50Ohm;
N9910X-811 = Rugged Phase-Stable Cable Type N(m)-N(f)
The Agilent (now Keysight) N9912A is a FieldFox Handheld RF Combination Analyzer.
FieldFox RF analyzers are designed to withstand your toughest working conditions. To accelerate your work, each operating mode has a task-driven user interface that saves time in the field.
The base function is a cable and antenna analyzer and it can be configured to include a spectrum and transmission/reflection 1-port vector, 2-port scalar network analyzer.
Furthermore it can be ordered with additional capabilities: power meter, independent signal generator and interference analyzer.
Cable and antenna analyzer (CAT), vector network analyzer (VNA):
Frequency range: 2 MHz to 4/6 GHz (This unit has 6 GHz)
Directivity > 42 dB
CAT: Distance-to-fault, return loss, cable loss
VNA: S11 magnitude and phase, S21 magnitude, time doman with gating
FielFox instrument attributes:
New: Remote control via iPad or iPhone
Battery life: 4 hours
Weight: 6.2 lbs
Operating temperature: 14 to 131 ° F
Option N9910X-800:
RF and MW handheld analyzer acessories:
3-in-1 OSL T-Calibration Kit, DC 6 GHz, type-N (m), 50 ohm:
A 6 GHz Type-N interface T-calibration kit with an open/short/load design for use on-site and for factory production testing.
Frequency range: 45 MHz to 6 GHz
Input power: +25 dBm max.
Source match: ≥ 35 dB
Directivity: ≥ 42 dB
Impendance: 50 ohm
Open specifications:
Male offset length: 21.287 mm
Phase tolerance: 1.25 degrees
RL: ≤ 0.10 dB
Load specifications:
DC resistance: 50 ohm +/- 0.5 ohm
RL: ≥ 42 dB
Short specifications:
Male offset length: 21.287 mm
Phase tolerance: 0.85 degrees
RL: ≤ 0.10 dB
Option N9910X-811:
Rugged phase-stable cable, type N (m) to type N (f), 5 ft or 1.5 m
€ 6,985 (net) $8,801 (US)