Used Agilent HP 432a for sale by SoCal Surplus | used-line.com
SPECIAL OFFERS
Request Cart ({{ cartItems.length }})
Watchlist ({{ wishlist.length }})
Watchlist ({{ wishlist.length }})
HOME Test and Measurement Meters Power Meters Agilent HP 432a

Agilent HP 432a

Send Request
  • $395

Send to a Friend
Flag of USAEquipment Location: USA      
View Description>
Hide Description

Description of Agilent HP 432a

Categories: Meters, Power Meters

Manufacturer: Keysight Technologies (Agilent HP)

Model: 432A

Condition: Used

HP 432a power meter 7ranges of 10,30,@101UW, 1,3,10mw

Product specifications of Agilent HP 432a (From Used-Line T&M Specifications)

  • Launch Date Jan-2049
  • Alternative N432A Thermistor Power Meter
  • Sensors 8.5 k
  • Channels 1
  • Freq. Range Low 100 kHz
  • Freq. Range High 110 GHz
  • Status Discontinued by Manufacturer

The Agilent 432A provides high accuracy over a wide temperature range. By measuring the output voltage of the thermistor bridges and computing the corresponding power, even higher accuracy of ±0.2 percent ±0.5 microW can be obtained. Accuracy can be maintained on even the most sensitive range because the error due to thermoelectric effect is reduced to a negligible level.

  • Power Range: 7 ranges with full-scale readings of 10, 30, 100 and 300 µW 1, 3 and 10 mW; also calibrated in dBm from -20 dBm to +10 dBm full scale in 5 dB steps
  • Noise: Less than 0.25% of full scale peak (typical)
  • Response Time: At recorder output, 35 ms time constant (typical)
  • Fine Zero: Automatic, operated by front-panel switch
  • Zero Carryover: Less than 0.50% of full scale when zeroed on most sensitive range
  • Meter: Taut-band suspension, individually calibrated, mirror-backed scales. Milliwatt scale more than 100 mm (4.25 in) long
  • Calibration Factor Control: 13-position switch normalizes meter reading to account for thermistor sensor calibration factor. Range 100% to 88% in 1% steps Thermistor Sensor:
  • Thermistor sensors are required for operation of the 432A.
  • Power Consumption: 115 to 230 Vac ± 10%, 50 to 400 Hz, 1.5 watts
  • No thermoelectric error for high accuracy over a wide dynamic range

View Similar Listings
Hide Similar Listings

Listings similiar to Agilent HP 432a

About SoCal Surplus

Send to a Friend

Recently Viewed Products

Wait! Don’t go yet!

You have {{cartItems.length}} items in your Request cart.
Would you like to send a Request to the Sellers before you leave?
Remind me later