The Anritsu MS4623B 6 GHz, 2-Port Vector Network Measurement System (VNMS) for passive, active, and frequency translating devices. This powerful S-parameter configuration offers the performance, ease-of-use and versatility of a vector network analyzer (VNA) with integrated options that allow 3-Port, Noise Figure, Harmonic, Frequency Translating Group Delay and Intermodulation Distortion (IMD) measurements. The 3-port configuration includes mixed-mode S-parameters, arbitrary impedance and powerful embedding/ de-embedding routines. True 2 and 3-Port Calibrations, mixed-Mode S-Parameters, Arbitrary Impedance. Specifications. Frequency Range: 10 MHz to 6 GHz. Source Power Range (No Options): +7 to –85 dBm. Level Accuracy: ±1 dB. Sweep Range: 20 dB Minimum. Harmonics: –30 dBc. Stability: < ppm / year. Receiver Average Noise, 10 Hz: –115 dBm (< GHz), –105 dBm (3 to 6 GHz). Receiver 0.1 dB Compression: +7 dBm. Receiver Maximum Input: +27 dBm. Receiver Damage Level: +30 dBm. System Dynamic Range (Terminated): 125 dB (10 to 3000 MHz), 110 dB (3000 to 6000 MHz). High Level Noise: <.008 dB rms (10 to 3000 MHz),<.018 dB rms (3000 to 6000 MHz). IF Bandwidth Range: 10 Hz, 30 Hz, 100 Hz, 300 Hz, 1 kHz, 3 kHz, 10 kHz, and 30 kHz. Data Points: 1, 3, 15, 51, 101, 201, 401, 801, and 1601; Arbitrarily use Discrete Fill for 2 to 1601 points. Impedance: 50 Ohms. Frequency Resolution: 1 Hz. Power Output Range Source 1 (2-Ports No Options): +10 to –85 dBm (10 MHz to 3 GHz), +7 to –85 dBm (10 MHz to 6 GHz). Power Output Range Source 1 (3-Ports Without Noise Figure): +10 to –85 dBm (10 MHz to 6 GHz). Power Output Range Source 1 (2, 3 or 4-Ports Add Noise Figure): +5 to –85 dBm (10 MHz to 6 GHz). Power Control Range: >20 dB. The minimum absolute level for power sweep is -15 dBm while the maximum power output for a unit is typically +10 dBm, depending upon configuration. Power Level Accuracy: ±1 dB to 6 GHz (no flat power calibration applied; full-band frequency sweep at -15 dBm, 0 dBm, and maximum rated power). Sweep Type: Linear, CW, Marker, or N-Discrete point sweep. Liquid Crystal Display: A Color 8.4" Thin Film Transistor (TFT) LCD display. Options. 1: Rack Mount Kit. 1A: Rack Mount Kit for use with System Console. 2: Time (Distance) Domain Measurement Capability. 3B: Second Internal Source, Third Test Port. 4: Noise Figure, 50 MHz to 3 GHz. 4B: Noise Figure, 50 MHz to 6 GHz. 5: Frequency Translation Group Delay. 6: Third Test Port Without Second Internal Source. 8: Harmonic Measurements. 13: Intermodulation Distortion (IMD). 15: Internal 500 MB Hard Drive.